Projected Capacitive Touch Panel IPS TFT 5 " with Optical Bonding (MIPI DSI)
Model No. WF50DTYA3MNG10
►Size : 5”
►Resolution : 720x1280 dots
►View Direction : IPS
►Interface : MIPI DSI
►Driver IC:ILI9881C
►Control-Board : No
►Brightness(cd/m²): 250
►Frame Through Hole : No
►Touch Panel : Projected Capacitive Touch Panel,OCA
►Detect Point : 10 Fingers
Description
The WF50DTYA3MNG10 is a cutting-edge 5-inch IPS TFT display featuring projected capacitive touch panel technology with optical bonding on the module. This TFT-LCD module supports the Mobile Industry Processor Interface MIPI (Mobile Industry Processor Interface) DSI (Interface Serial de Display), providing seamless and efficient communication.
Highlighted by its vibrant IPS panel, the display boasts a high-definition resolution of 720 x 1280, ensuring crisp and clear visuals. IPS technology offers a wider viewing angle, with impressive typical angles of Left: 80 / Right: 80 / Up: 80 / Down: 80 degrees.
Operating flawlessly in a temperature range from -20℃ to +70℃, and with storage capabilities spanning from -30℃ to +80℃, this 5-inch portrait mode TFT LCD is designed for versatility in various environments.
At its core, the module integrates the advanced ILI9881C driver IC and the responsive capacitive touchscreen IC, GT928. The power supply for the analog circuit is flexible, ranging from 2.5V to 3.6V, with typical values set at 3.3V.
What sets this model apart is its adoption of optical bonding for the capacitive touch panel. This technology significantly enhances the ruggedness of the display, elevating durability to new heights. The bonded capacitive touch panel is adept at resisting scratches, fluids, stains, and dirt, ensuring long-lasting and reliable performance.
DRAWING
SPECIFICATIONS
Interface
LCM PIN Definition
Pin | Symbol | Function |
---|---|---|
1-9 | NC | No connection |
10-11 | VCI | Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V |
12-13 | NC | No connection |
14 | RESET | The external reset input Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. Fix to VDDI level when not in use. |
15 | TE | Tearing effect output pin. Leave the pin open when not in use. |
16 | NC | No connection |
17-18 | GND | Power ground |
19-20 | IOVCC | Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V |
21 | GND | Power ground |
22 | D3P | MIPI DSI differential data pair. (Data lane 3) |
23 | D3N | |
24 | GND | Power ground |
25 | D2P | MIPI DSI differential data pair. (Data lane 2) |
26 | D2N | |
27 | GND | Power ground |
28 | CLKP | MIPI DSI differential clock pair |
29 | CLKN | |
30 | GND | Power ground |
31 | D1P | MIPI DSI differential data pair. (Data lane 1) |
32 | D1N | |
33 | GND | Power ground |
34 | D0P | MIPI DSI differential data pair. (Data lane 0) |
35 | D0N | |
36-37 | GND | Power ground |
38 | LED+ | Power for LED backlight anode |
39 | LED1- | Power for LED1 backlight cathode |
40 | LED2- | Power for LED2 backlight cathode |
PCAP PIN Definition
Pin | Symbol | Function |
---|---|---|
1 | SDA | I2C data input and output |
2 | SCL | I2C clock input |
3 | RST | External Reset, Low is active |
4 | INT | External interrupt to the host |
5 | VDD | Power Supply : +3.3V |
6 | GND | Ground for analog circuit |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 5.0 | inch |
Dot Matrix | 720 × 3(RGB) ×1280 | dots |
Module dimension | 73.3 (W) × 127.6 (H) ×3.45 | mm |
Active area | 62.1 (W) × 110.4 (H) | mm |
Dot pitch | 0.08625(W) × 0.08625(H) | mm |
LCD type | TFT, Normally Black, Transmissive | |
Viewing angle | 80/80/80/80 | |
Aspect Ratio | 16:9 | |
Backlight Type | LED, Normally White | |
TFT Drive IC | ILI9881C or Equivalent | |
TFT Interface | MIPI | |
PCAP FW Version | 0x5F | |
PCAP IC | GT928 | |
Touch Panel | Projected capacitive touch panel (PCAP) | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Typical Operation Conditions
Item | Symbol | Values | Unit | ||
---|---|---|---|---|---|
Min | Typ | Max | |||
Power supply for analog circuit | VCI | 2.5 | 3.3 | 3.6 | V |
Power supply for logic circuit | IOVCC | 1.65 | 1.8 | 3.6 | V |
Supply Voltage For Touch Logic | VDDT | 2.8 | - | 3.3 | V |
Current for Driver | IDD | - | 44 | - | mA |
Backlight Driving Conditions
Parameter | Symbol | Min. | Typ. | Max. | Unit |
---|---|---|---|---|---|
LED current | ILED | - | 40 | - | mA |
LED voltage | VLED+ | 19.6 | - | 23.8 | V |
LED Life Time | 30,000 | - | - | Hr |
Search keyword: tft 5, tft 5", 5 tft lcd, 5" tft lcd, 5 inch tft lcd, tft lcd 5, 5 tft display, 5" tft display, 5 inch tft display, tft display 5, tft display 5", 5.0 tft lcd,5"tft