หมายเลขรุ่น WF39QTIBSDBG0
►นาด: 3.9 นิ้ว
►ความละเอียด : 480x128 จุด
►ทิศทางการมอง : 12H
►อินเตอร์เฟซ : MCU
►TFT IC ไดรเวอร์ : SSD1963
►แผงควบคุม : Yes
►ความสว่าง (cd/m²) : 400
►เฟรมแบบ รูทะลุ : Yes
►หน้าจอสัมผัส :PCAPพร้อมแผงระบบสัมผัส (หน้าจอ) แบบ Capacitive
►Detect Point : 5 Fingers
การร่าง
ข้อมูลจำเพาะ
คุณสมบัติการปักไว้ที่อินเตอร์เฟส
LCM PIN Definition
Pin | สัญลักษณ์ | คุณสมบัติการทำงาน |
---|---|---|
1 | GND | System round pin of the IC. Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BL_E | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7 | DB0 | Data bus |
8 | DB1 | Data bus |
9 | DB2 | Data bus |
10 | DB3 | Data bus |
11 | DB4 | Data bus |
12 | DB5 | Data bus |
13 | DB6 | Data bus |
14 | DB7 | Data bus |
15 | DB8 | Data bus (When select 8bits mode, this pin is NC) |
16 | DB9 | Data bus (When select 8bits mode, this pin is NC) |
17 | DB10 | Data bus (When select 8bits mode, this pin is NC) |
18 | DB11 | Data bus (When select 8bits mode, this pin is NC) |
19 | DB12 | Data bus (When select 8bits mode, this pin is NC) |
20 | DB13 | Data bus (When select 8bits mode, this pin is NC) |
21 | DB14 | Data bus (When select 8bits mode, this pin is NC) |
22 | DB15 | Data bus (When select 8bits mode, this pin is NC) |
23 | NC | No connect |
24 | NC | No connect |
25 | CS | Chip select |
26 | RESET | Hardware reset |
27 | DISP_ON | Display on/off control |
28 | NC | No connect |
29 | NC | No connect |
30 | NC | No connect |
31 | NC | No connect |
32 | NC | No connect |
33 | VLED- | VLED- for B/L LED inverter (GND) |
34 | VLED- | VLED- for B/L LED inverter (GND) |
35 | VLED+ | VLED+ for B/L LED inverter (+5V) |
36 | VLED+ | VLED+ for B/L LED inverter (+5V) |
PCAP PIN Definition
Pin | สัญลักษณ์ | คุณสมบัติการทำงาน |
---|---|---|
1 | VSS | Ground for analog circuit |
2 | VDDT | Power Supply : +3.0V |
3 | SCL | I2C clock inputI2C clock input |
4 | NC | No connect |
5 | SDA | I2C data input and output |
6 | NC | No connect |
7 | /RST | External Reset, Low is active |
8 | NC | No connect |
9 | /INT | External interrupt to the host |
10 | VSS | Ground for analog circuit |
ข้อกำหนดทั่วไป
รายการ | ขนาด | หน่วย |
---|---|---|
ขนาด (เส้นทแยงมุม) | 3.9 | นิ้ว |
ความละเอียด | 480 × 128 × RGB (TFT) | dots |
ขนาดโมดูล | 122.0 × 44.0 × 9.8(max) | mm |
พื้นที่ที่ใช้งานอยู่ | 95.04 × 25.34 | mm |
ระดับจุด | 0.066(W) × 0.198(H) | mm |
ประเภท LCD | TFT, ขาว, ทรานสมิสซีฟ | |
ทิศทางการมอง | 12 o'clock | |
ทิศทางการผกผันระดับสีเทา | 6 o'clock | |
อัตราส่วนภาพ | Bar Type | |
TFT IC ไดรเวอร์ | SSD1963 | |
TFT อินเตอร์เฟซ | Digital 8080 family MPU 8bit/16bit | |
PCAP IC | CYTMA568 Or Equal | |
PCAP FW Version | TBD | |
ประเภทแสงไฟพื้นหลัง | LED, ขาว | |
Color arrangement | RGB-STRIPE | |
หน้าจอสัมผัส | พร้อมแผงระบบสัมผัส (หน้าจอ) แบบ Capacitive | |
พื้นผิว | แสงจ้า |
คะแนนสูงสุด
รายการ | สัญลักษณ์ | ค่าต่ำสุด | ค่าปกติ | ค่าสูงสุด | หน่วย |
---|---|---|---|---|---|
อุณหภูมิในการทำงาน | TOP | -20 | - | +70 | ℃ |
อุณหภูมิในการจัดเก็บ | TST | -30 | - | +80 | ℃ |
ลักษณะทางอิเล็กทรอนิก
Operating conditions: (CON3.Pin1=GND, Pin2=VDD)
รายการ | สัญลักษณ์ | ค่าต่ำสุด | ค่าปกติ | ค่าสูงสุด | หน่วย |
---|---|---|---|---|---|
Supply Voltage For LCM | VDD | 3.0 | 3.1 | 3.3 | V |
Supply Current For LCM | IDD | — | 200 | — | mA |
Supply Voltage For CTP | VDDT | 2.8 | - | 3.3 | V |
Supply Current For CTP | IDDT | — | 35 | — | mA |