Home Products OLED Module Graphic OLED Display WEA009664B

96x64 OLED Display,1.1 inch OLED

Model No. WEA009664B

►1.1" OLED
►Type: Graphic
►Structure: COG+PCB
►96×64 Dot Matrix
►IC:SSD1327
►3V Power supply
►1/64 duty
►Interface: SPI
►Display Color: White / Yellow
►Support Grayscale

DRAWING

96x64 OLED Display,1.1 OLED - WEA009664B - Winstar Display

Data source ref:WEA009664BLAP3N00000

SPECIFICATIONS

Interface Pin Function

No. Symbol Function
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
2 SCL
3 SA0 This pin is Data/Command control pin connecting to the MCU.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

General Specification

Item Dimension Unit
Dot Matrix 96 × 64 Dots
Module dimension 31.5 × 31.5 × 2.72 mm
Active Area 22.53 × 15.01 mm
Pixel Size 0.205 × 0.205 mm
Pixel Pitch 0.235 × 0.235 mm
Display Mode Passive Matrix
Display Color Monochrome
Gray scale 4 bits
Drive Duty 1/64 Duty
IC SSD1327
Interface SPI
Size 1.1 inch

Electronical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic (3V) VDD 2.8 3.0 3.2 V
Supply Voltage for Logic (5V) VIN 4.8 5.0 5.2 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDD V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current IDD VDD=3.0V 55 100 mA

Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage for Logic VDD 1.65 3.30 V
Supply Voltage for Logic VIN 4.0 6.0 V
Operating Temperature TOP -40 80 °C
Storage Temperature TSTG -40 85 °C

Search keyword: 96x64 oled display, oled 96x64, 1.1 oled, 1.1" oled, 1.1 inch oled, oled 1.1"
go top
close