หน้าแรก ผลิตภัณฑ์ โมดูล OLED จอ OLED กราฟฟิก WEO064128A

หมายเลขรุ่น WEO064128A

►ประเภท: กราฟฟิก
►โครงสร้าง: COG
►ขนาด: 0.96 นิ้ว
►64x128 Dot Matrix
►IC:SH1107
►แหล่งจ่ายไฟ 3V
►1/64 duty
►อินเตอร์เฟซ: SPI, I2C
►สีการแสดงผล: ขาว / สีเหลือง

การร่าง

64x128 OLED Display, SH1107 OLED Display, OLED 64x128 - WEO064128A

Data source ref: WEO064128AWPP3N0Y000

ข้อมูลจำเพาะ

คุณสมบัติการปักไว้ที่อินเตอร์เฟส

No. สัญลักษณ์ คุณสมบัติการทำงาน
1 NC Not connected.
2 VPP This is the most positive voltage supply pad of the chip.
It should be supplied externally.
3 VCOMH This is a pad for the voltage output high level for common signals.
A capacitor should be connected between this pad and VSS.
4 VDD Power supply for logic and input.
5 IM1 These are the MPU interface mode select pads.
IM1 connect to VDD is I2C interface.
IM1 connect to GND is 4-wire SPI interface.
6 IREF This is a segment current reference pad. A resistor should be connected between this pad and VSS. Set the current at 15.625mA.
7 CS This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data/command I/O is enabled.
8 RES This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
9 DC This is the Data/Command control pad that determines whether the data bits are data or a command.
DC = “H”: the inputs at D0 to D1 are treated as display data.
DC = “L”: the inputs at D0 to D1 are transferred to the command registers.
In I2C interface, this pad serves as SA0 to distinguish the different address of OLED driver.
10 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
When the I2C interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SDA).
11 D1
12 VSS Ground.
13 NC Not connected.

ข้อมูลเชิงกล

รายการ ขนาด หน่วย
ความละเอียด 64 × 128 Dots
ขนาดโมดูล 14.0 × 28.0 × 1.26 mm
พื้นที่ที่ใช้งานอยู่ 10.86× 21.74 mm
ขนาดจุด 0.15 × 0.15 mm
ระดับจุด 0.17 × 0.17 mm
โหมดการแสดงผล พาสซีฟเมทริกซ์
สีการแสดงผล Monochrome
Drive Duty 1/64 Duty
IC SH1107
อินเตอร์เฟซ 4-wire SPI , I2C
ขนาด (เส้นทแยงมุม) 0.96 นิ้ว

คะแนนสูงสุด

Parameter สัญลักษณ์ ค่าต่ำสุด ค่าสูงสุด หน่วย
Supply Voltage for Logic VDD -0.3 3.6 V
Supply Voltage for Display VPP -0.3 17.0 V
อุณหภูมิในการทำงาน TOP -30 +70 °C
อุณหภูมิในการจัดเก็บ TSTG -30 +70 °C

ลักษณะทางอิเล็กทรอนิก

รายการ สัญลักษณ์ เงื่อนไข ค่าต่ำสุด ค่าปกติ ค่าสูงสุด หน่วย
Supply Voltage for Logic VDD 1.65 3.0 3.3 V
Supply Voltage for Display VPP 7.0 9.0 9.5 V
Input High Volt. VIH 0.8×VDD VDD V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.8×VDD VDD V
Output Low Volt. VOL 0 0.2×VDD V
Operating Current for VCC (50% display ON)   IPP VPP=9V 8 12 mA

Search keyword: 64x128 oled, oled 64x128, 0.96 oled, 0.96" oled, 0.96 inch oled, oled 0.96, oled 0.96"
go top
close