Home Produtos LCD Gráfico WG320240BP3

Model No. WG320240BP3

►LCD gráficos 320x240
►Display LCD monocromático
►Controlador S1D13700 integrado
►Gerador de tensão negativa integrada
►1/240 duty cycle
►Opção de tela de toque (tipo analógico)
►Opção de compensação de temperatura
►Interface: 6800/8080
►Com driver de painel de toque, 26 pinos

SPECIFICATIONS

Interface Pin Function

Pin No. Symbol Level Description
1 VSS 0V Ground
2 VDD 5.0V Power supply for Logic
3 VO (Variable) Driving voltage for LCD
4 A0 H/L RD=L WR=H ,A0=L :Data Read AO=H :Status read
RD=H WR=L ,A0=L :Data Write AO=H :Command write
5 ___
WR
H/L 8080 family: Write signal, 6800 family: R/W signal
6 ___
RD
H/L 8080 family: Read signal, 6800 family: Enable clock
7~14 DB0~DB7 H/L Data bus line
15 ___
CS
H/L Chip select ,Active L
16 ___
RES
H/L Controller reset signal, Active L
17 Vee   Negative Voltage Output
18 SEL1   8080 or 6800 interface select
19 DCLK   External Clock Input. This clock runs the SAR conversion process and synchronizes serial data I/O.
20 /CS   Chip Select Input. Controls conversion timing and enables the serial input/output register. CS high = power-down mode (ADC only).
21 DIN   Serial Data Input. If CS is low, data is latched on rising edge of DCLK.
22 DOUT   Serial Data Output. Data is shifted on the falling edge of DCLK. This output is high impedance when CS is high.
23 PEN   Pen Interrupt. Open anode output (requires 10kΩ to 100kΩ pull-up resistor externally).
24 PEN1   Pen Interrupt. Open anode output (requires 10kΩ to 100kΩ pull-up resistor externally).
25 NC   No connection
26 AUX   Auxiliary Input to AD

Mechanical Data

Item Dimension Unit
Number of dots 320 × 240
Module dimension 160.0 × 109.0 × 12.5(MAX) mm
View area 122.0 × 92.0 mm
Active area 115.18 × 86.38 mm
Dot size 0.33 × 0.33 mm
Dot pitch 0.36 × 0.36 mm
Duty 1/240
Backlight Type LED
IC S1D13700

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 70
Storage Temperature TST -30 80
Input Voltage VIN -0.3 VDD+0.5 V
Output Voltage VOUT -0.3 VDD+0.5 V
Supply Voltage For Logic VDD-VSS 0 6.5 V
Supply Voltage For LCD VDD-V0 0 32 V

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For Logic VDD-VSS 4.5 5.0 5.5 V
Supply Voltage For LCD VDD-V0 Ta=-20℃
Ta=25℃
Ta=70℃

23.0
22.2

23.6
26.1
24.2
V
V
V
Input High Volt. VIH 3.5 V
Input Low Volt. VIL 1.0 V
Output High Volt. VOH VDD-0.4 V
Output Low Volt. VOL 0.4 V
Supply Current IDD VDD=5.0V 65.0 75.0 85.0 mA

Search Keyword: 320x240 lcd, 320 x 240 lcd, lcd 320 x240
go top
close