Model No. WO24064A1
►LCD COG
►LCD Gráfico
►240 x 64 pontos inclui cursor
►Controlador ST7565P integrado
►Alimentação 3,3V
►Interface : 6800/8080/SPI
DRAWING

SPECIFICATIONS
Interface Pin Function
Pin No. | Symbol | Description |
---|---|---|
1 | NC | No connection |
2 | FR | Scan start-up signal |
3 | CL | External clock 2KHZ |
4 | /DOF | This is the LCD blanking control terminal. |
5 | /CS1 | The chip select signal |
6 | CS2 | The chip select signal |
7 | /RES | Controller reset signal, Active Low |
8 | A0 | Data/ Instruction select signal |
9 | /WR | Data write. Write data into LCD Controller |
10 | /RD | Data read. Read data from LCD Controller |
11~18 | DB0~DB7 | Data bus line |
19 | VDD | Power supply for logic |
20 | VSS | Ground |
21 | Vout | Positive Voltage output |
22 | C3+ | DC/DC voltage converter. |
23 | C1- | DC/DC voltage converter. |
24 | C1+ | DC/DC voltage converter. |
25 | C2+ | DC/DC voltage converter. |
26 | C2- | DC/DC voltage converter. |
27~31 | V4~V0 | Bias voltage levels for LCD driving |
32 | VR | LCD Contrast Adjustment when IRS = “L” |
33 | C86 | Interface selection 6800/8080 |
34 | P/S | Selects the interface type: Serial or Parallel. |
35~36 | NC | No connection |
Mechanical Data
Item | Standard Value | Unit |
---|---|---|
Module Dimension | 142.5 × 51.7 | mm |
Viewing Area | 130.2 × 37.6 | mm |
Mounting Hole | 135.2 × 44.7 | mm |
Dot Pitch | 0.53 × 0.53 | mm |
Dot Size | 0.50 × 0.50 | mm |
Electrical Characteristics
Item | Symbol | Standard value typ. |
Unit |
---|---|---|---|
Input Voltage | VDD | 3.3 | V |
Recommended LCD Driving Voltage for Normal Temp. Version module @25°C |
Vo-Vss | 11.0 | V |
Search Keyword: 240x64 lcd, 240 x 64 lcd, lcd 240x64, lcd 240 x 64