Model No. WO12864A1
►LCD COG 128x64
►LCD Gráfico
►IC: ST7565P
►Alimentação 3,3V
►1/65 duty cycle
►Interface : 6800/8080/SPI
| Pin No. | Símbolo | Level | DESCRIÇÃO |
|---|---|---|---|
| 1 | P/S | I | This is the parallel data input/serial data input switch terminal. |
| 2 | C86 | I | This is the MPU interface switch terminal. |
| 3 | VR | I | Output voltage regulator terminal. Provides the voltage between VSS and V0 through a resistive voltage divider. |
| 4~8 | V0~V4 | Power supply | This is a multi-level power supply for the liquid crystal drive. |
| 9 | CAP2N | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal. |
| 10 | CAP2P | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. |
| 11 | CAP1P | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. |
| 12 | CAP1N | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal. |
| 13 | CAP3P | O | DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. |
| 14 | VOUT | O | DC/DC voltage converter. Connect a capacitor between this terminal and vss or VDD |
| 15 | VSS | Power supply | Ground |
| 16 | VDD | Power supply | Power supply |
| 17~24 | D7~D0 | I/O | This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus. |
| 25 | /RD(E) | I | The data bus is in output status when this signal is “L” |
| 26 | /WR(R/W) | I | The data bus are latched at the rising edge of the WR signal |
| 27 | A0 | I | This is connect to the least significant bit of the Norman MPU address bus, and it determines whether the data bits are data or a command. |
| 28 | /RES | I | When RES is set to “L”, the setting are initialized. |
| 29 | /CS1 | I | This is the chip select signal. |
| Item | Dimensão | Unidade |
|---|---|---|
| Number of Dots | 128 x 64 | － |
| Dimensão do módulo | 60.1 x 44.5 x 5.01(MAX) | mm |
| View area | 54.6 x 32.0 | mm |
| Área ativa | 49.89 x 27.49 | mm |
| Tamanho do ponto | 0.36 x 0.4 | mm |
| Distância entre pontos | 0.39 x 0.43 | mm |
| Duty | 1/65 , 1/9 Bias | |
| Tipo de luz de fundo | LED | |
| IC | ST7565P | |
| Interface | 6800/8080/4-Line SPI | |
| Item | Símbolo | Min | Típico | Máximo | Unidade |
|---|---|---|---|---|---|
| Temperatura de operação | TOP | -20 | － | +70 | ℃ |
| Temperatura de armazenamento | TST | -30 | － | +80 | ℃ |
| Power Supply Voltage | VDD | -0.3 | － | 3.6 | V |
| Power supply voltage (VDD standard) | V0,VOUT | -0.3 | － | 14.5 | V |
| Power supply voltage (VDD standard) | V1,V2,V3,V4 | -0.3 | － | V0+0.3 | V |
| Item | Símbolo | Condition | Min | Típico | Máximo | Unidade |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 2.7 | 3.0 | 3.3 | V |
| Supply Voltage For LCM | V0-VSS | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 9.2 － |
－ 9.5 － |
－ 9.8 － |
V V V |
| Input High Volt. | VIH | － | 0.8 VDD | － | VDD | V |
| Input Low Volt. | VIL | － | VSS | － | 0.2VDD | V |
| Output High Volt. | VOH | IOUT=-0.5mA | 0.8VDD | － | VDD | V |
| Output Low Volt. | VOL | IOUT=0.5mA | VSS | － | 0.2VDD | V |
| Supply Current(No include LED Backlight) | IDD | VDD=3.0V | － | 0.1 | 2.0 | mA |
Ao clicar em "Permitir todos os cookies", você concorda com o armazenamento de cookies no seu dispositivo para melhorar a navegação no site, analisar o uso do site e auxiliar nossos esforços de marketing e desempenho. Você pode encontrar mais informações sobre esse assunto em nossa política. Política de privacidade
