5.7" TFT LCD Modules

Model No. WF57DTIACDNN0

►Size : 5.7 inch
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface: RGB
►Built-in Controller : No
►Control-Board : Option
►Brightness(cd/m²) : 500
►Frame Through Hole : No
►Touch Screen : No
►O-Film: Option

PDF DOWNLOAD

DEMO CODE ADD TO INQUIRY

PREV. BACK to LIST NEXT

DRAWING

WF57DTIACDNN0 - 320x240 TFT Module, TFT LCD Panel

SPECIFICATIONS

Interface

Pin No.	Symbol	I/O	Description
1~2	IF1~IF2	I	Input data format control
3	POL	O	Polarity Signal connect to VCOM driving circuit.
4	RESET	I	Hardware reset.
5	SPENA	I	Chip select
6	SPCL	I	Serial Clock
7	SPDA	I/O	Serial Data
8	B0	I	Blue Data bit (LSB)
9~14	B1~B6	I	Blue Data bit
15	B7	I	Blue Data bit(MSB)
16	G0	I	Green Data bit(LSB)
17~22	G1~G6	I	Green Data bit
23	G7	I	Green Data bit(MSB)
24	R0	I	Red Data bit(LSB)
25~30	R1~R6	I	Red Data bit
31	R7	I	Red Data bit(MSB)
32	Hsync	I	Horizontal synchronous signal
33	Vsync	I	Vertical synchronous signal
34	Data CLK	I	Dot data clock
35~36	AVDD	I	4.5V~5.5V
37~38	Vcc	I	3V~3.6V
39	NPC	O	NTSC/PAL mode Auto detection result H:NTSC/L:PAL
40~41	VGL	I	Gate off power
42	UD	I	Up/Down scan setting. H: Reverse scan / L: Normal scan
43	VGH	I	Gate on power
44	LRC	I	Shift direction of device internal shift register control.
45	GND	I	GROUND
46~47	VCOM	I	VCOM driving input
48	ENB	I	Data enable input. Normally pull low.
49~50	GND	I	GROUND

Note: I: input, O: output, P: Power

General Specifications

Item	Dimension	Unit
Size	5.7	inch
Dot Matrix	320 × RGB x 240 (TFT)	dots
Module dimension	126.00(W) × 101.55(H) × 6.0(D) (MAX)	mm
Active area	115.2 × 86.40	mm
Dot pitch	0.12 × 0.36	mm
LCD type	TFT, Normally White, Transmissive
View Direction	12 o'clock
Gray Scale Inversion Direction	6 o'clock
Backlight Type	LED, Normally White
Touch Panel	Without touch panel
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	T_OP	-20	－	+70	℃
Storage Temperature	T_ST	-30	－	+80	℃
Power Supply Voltage	V_GH	-0.3	－	32.0	V
	V_GL	-22	－	0.3	V
	V_GH - V_GL	-0.3	－	+45	V

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For LCM	VCC	－	3.0	3.3	3.6	V
Input High Volt.	V_IH	－	0.7 VCC	－	VCC	V
Input Low Volt.	V_IL	－	0	－	0.3 VCC	V
LCD Driving Supply Voltage	V_GH x 1	Ta=25℃	-	15	-	V x 3
	V_GL x 2		-	-10	-
	VcomH		2.5	-	5.5
	VcomL		-2.0	-	0
Supply Current For LCM	I_VCC	VCC=3.3V	－	5	8	mA

Search keyword: tft 5.7, tft 5.7", 5.7 tft lcd, 5.7" tft lcd, 5.7 inch tft lcd, tft lcd 5.7, 5.7 tft display, 5.7" tft display, 5.7 inch tft display, tft display 5.7, tft display 5.7"