Home Products TFT LCD TFT Panel + Controller Board WF70QTZFGDBN0

7 TFT Display Panel with TFT LCD Controller Boards


►Size : 7.0 inch
►Resolution : 800x480 dots
►View Direction : 12H
►Interface : MPU
►Bulit-in Controller : SSD1963
►Control Board : Yes
►Brightness (cd/m²) : 360
►Touch Screen : No
►O-Film: Yes


The WF70QTZFGDBN0 is a 7 inch Winstar Q Series TFT LCD Display.  This display built in with SSD1963 controller board, the model is available in 8080 family MPU 8bit/16bit options and already defined pin no. 33 ~ 36 as backlight supply. The model 7" TFT LCD Display WF70QTZFGDBN0 is with outline dimension of 165 x 100 mm and AA size 154.08 x 85.92 mm.


WF70QTZFGDBN0 - 7 TFT Display



Pin Symbol Function Pin Symbol Function
1 GND System ground pin of the IC .
Connect to system ground.
23-24 NC No connect
2 VDD Power Supply : +3.3V 25 CS Chip select
3 BLE Backlight control signal , H: On \ L: Off 26 RST Hardware reset
4 D/C Data/Command select 27 L/R Left / right selection; Default L/R=H
5 WR Write strobe signal 28 U/D Up/down selection; ; Default U/D=L
6 RD Read strobe signal 29-32 NC No connect
7-14 DB0~DB7 Data bus 33-34 VLED- Power for LED Driver IC(GND)
15-22 DB8~DB15 Data bus
(When select 8bits Mode, this pin is NC)
35-36 VLED+ Power for LED Driver IC(+5V)

General Specifications

Item Dimension Unit
Size 7.0 inch
Dot Matrix 800 × RGB × 480(TFT) dots
Module dimension 165.0(W) × 100.0(H) × 12.2(D) mm
Active area 154.08 × 85.92 mm
Dot pitch 0.0642 × 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Backlight Type LED,Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Panel Without touch panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Operating conditions: (CON2.Pin1=GND, Pin2=VDD)

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 300 450 mA

Backlight driving conditions (CON2.Pin33,34=VLED-, Pin35,36=VLED+)

Parameter Symbol Min. Typ. Max. Unit
Operation Current For LED Driver VLED=5V 400 600 mA
Power Consumption VLED=5V 2000 3000 mW
Supply Voltage For LED Driver VLED+ 5 V
LED Life Time 20,000 Hr

Search keyword: tft 7, tft 7", 7 tft lcd, 7" tft lcd, 7 inch tft lcd, tft lcd 7, 7 tft display, 7" tft display, 7 inch tft display, tft display 7, tft display 7", 7.0 tft lcd
go top