3.12" 256x64 COF OLED Display With PCB and Frame
Model No. WEX025664B-PCB
►Type: Graphic
►Structure: COF+PCB+Frame
►Size: 3.12"
►256 x 64 Dot Matrix
►Built-in controller SSD1322
►3V Power supply
►1/64 duty
►Interface: 6800, 8080, SPI
►Display Color: White / Yellow / Sky Blue / Green
►Support Grayscale
DESCRIPTION
WEX025664B-PCB model is a COF type Graphic OLED with PCB on module; it’s diagonal size 3.12 inch, made of 256x64 pixels. This PCB board with four mounting holes is an easy method for customers to fix modules on their applications. Furthermore, the integration of interface setting with VCC circuit on PCB board makes it even simpler to use. This WEX025664B-PCB module is built in with SSD1322 IC; it supports 6800/8080 parallel and 3-wire/4-wire SPI interface, 16 (4bits) gray scale, driving duty 1/64, supply voltage for logic is from 3.3V, the display with 50% check board current is 150mA @VDD 3V (typical value).
This COF OLED module is suitable for medical applications, control panel, smart home applications, etc. WEX025664B-PCB module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.
DRAWING

Data source ref: WEX025664BWAP3N00002
SPECIFICATIONS
Interface Pin Function
Pin Number |
Symbol | I/O | Function | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | VSS | P | Ground. | ||||||||||
2 | VDD | P | Power Supply for Core Logic Circuit Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS |
||||||||||
3 | N.C. | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
4 | D/C# | I | Data/Command Control This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data. When the pin is pulled LOW, the content at D[7:0] will be interpreted as command. |
||||||||||
5 | R/W# (WR#) |
I | Read/Write Select or Write This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode. When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low. When serial mode is selected, this pin must be connected to VSS. |
||||||||||
6 | E/RD# | I | Read/Write Enable or Read This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low. When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low. When serial mode is selected, this pin must be connected to VSS. |
||||||||||
7~14 | DB0 | I/O | Host Data Input/Output Bus These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. |
||||||||||
DB1 | |||||||||||||
DB2 | |||||||||||||
DB3 | |||||||||||||
DB4 | |||||||||||||
DB5 | |||||||||||||
DB6 | |||||||||||||
DB7 | |||||||||||||
15 | NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
16 | RES# | I | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
||||||||||
17 | CS# | I | Data/Command Control This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW. |
||||||||||
18 |
NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
||||||||||
19 | BS1 | I | Communicating Protocol Select These pins are MCU interface selection input. See the following table:
(1) 0 is connected to VSS (2) 1 is connected to VDD |
||||||||||
20 | BS0 | ||||||||||||
21~24 | NC | P | Reserved Pin The N.C. pin between function pins are reserved for compatible and flexible design. |
General Specification
Item | Dimension | Unit |
---|---|---|
Dot Matrix | 256 x 64 Dots | - |
Module dimension | 89.2 × 44.0 × 3.3 Max. | mm |
Active Area | 76.78 × 19.18 | mm |
Pixel Size | 0.278 × 0.278 | mm |
Pixel Pitch | 0.3 × 0.3 | mm |
Display Mode | Passive Matrix | |
Display Color | Monochrome | |
Drive Duty | 1/64 Duty | |
Gray Scale | 4 bits | |
IC | SSD1322 (COF) | |
Interface | 6800, 8080, SPI | |
Size | 3.12 inch |
Absolute Maximum Ratings
Parameter | Symbol | Min | Max | Unit |
---|---|---|---|---|
Supply Voltage for Display | VDD | -0.3 | 4 | V |
Operating Temperature | TOP | -40 | 80 | °C |
Storage Temperature | TSTG | -40 | 85 | °C |
Electronical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage for Logic | VDD | - | 2.8 | 3.0 | 3.3 | V |
High Level Input | VIH | - | 0.8×VDD | - | VDD | V |
Low Level Input | VIL | - | 0 | - | 0.2×VDD | V |
High Level Output | VOH | - | 0.9×VDD | - | VDD | V |
Low Level Output | VOL | - | 0 | - | 0.1×VDD | V |
50% Check Board operating Current | IDD | VCC =3V | - | 150 | 300 | mA |
Search keyword: 256x64 oled, oled 256x64, 3.12 oled, 3.12" oled, 3.12 inch oled, oled 3.12, oled 3.12"