Home Products Embedded System WUAAAA120V101ATCTX00

10.1 inch RTP TFT LCD with Embedded Computer Board

Model No. WUAAAA120V101ATCTX00

►Embedded Computer Boards
►TFT Size: 10.1"
►With TFT Model No: WF101ATCJHLNTZ
►Resolution: 1024×600
►View Direction: 12H
►Interface: LVDS
►Touch Screen: With resistive touch panel
►Power Supply: DC12V
►Operating System: Android 4.2.2


WUAAAA120V101ATCTX00 is a Winstar Embedded Computer Boards TFT model which is having an ARM based motherboard integrated a 10.1 inch TFT LCD module of WF101ATCJHLNTZ.  This model is featured with 1024×600 resolution diagonal size 10.1” TFT LCD; it supports LVDS interface and with a 4-wire Resistive Touch Panel (RTP). This model supports Android 4.2.2 Operating Systems.
The Embedded Computer Boards WUAAAA120V0000N0NX00 (A Series) on this model is a single board computer (SBC) based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.
WUAAAA120V0000N0NX00 i.MX6 incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.


10.1 inch with Embedded Computer Boards - Winstar Display


Embedded Motherboard Specification
(Embedded Computer Boards)

Form Factor    
  Cpu NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional)
Processor System Technology DDR3 1GB x64 bit at 400MHz
  Capacity Onboard DDR3 1GB(2GB Max)
  Flash  4GB(8GB Max) eMMC NAND Flash for Advantech boot loader
  LVDS Dual output 24 bit LVDS(1024*600 or 1024*768)
Graphic RGB 18-bits/24-bits TTL with DE+H/V sync(800*480)
  Graphic engine 3D GPU with 1 shadow
  H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
  MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
  USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
I/O Audio Wolfson (Line out)
  Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
  SPI 2 (Host, option) 
  IIC 2 (Client, option)
  Touch 4-wire Resistive type(onboard)/ PCAP is driven IIC interface  
  GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
  Consumption 2.5W
Environment Temperature -10℃~60℃/ -20℃~70℃
Dimension Motherboard  114mm * 95mm * 20mm

TFT Specifications

Item - WF101ATCJHLNTZ Dimension Unit
Size 10.1 inch
Dot Matrix 1024 × RGB × 600(TFT) Dots
Module Dimension 235(W) × 143(H) × 5.36(D) mm
Active Area 222.72(H) × 125.28(V) mm
Dot Pitch 0.2175(W) × 0.2088(H) mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 4:3
Backlight Type LED, Normally White
With /Without TP With RTP
Interface LVDS
Surface Glare
go top