Oct.2016-English         Issue No.95 www.winstar.com.tw
 
Issue No. 95
 
Contents
1. Product Introduction - 5.2” TFT WF52A with O Film Technology
2. Product Introduction - 5.2” WF52A O-Film with High Brightness
3. Winstar Embedded Series Introduction
4. Winstar Embedded Series Specification

 

 

Product Introduction - 5.2” TFT WF52A with O Film Technology

Winstar Display released a series of bar type 5.2” TFT LCD display; it's a new size and resolution of TFT displays resolution which exclusively offered by Winstar. This 5.2 inch bar type TFT WF52A LCD display offers high quality and colorful image made of resolution 480x128 pixels; it is especially suitable for industrial equipment & automotive applications, server system, POS system, dynamic information displays, audio system and advertising display.

 

WF52ATZASDNN0 is having module dimension of 140.4 x 49.87 mm and Active Area of 127.152 x 33.9072 which with the same size as WF52ATLASDNN0 but having wider viewing angle. This TFT display is featured with O-Film on panel having the advantages of wider viewing angle of Left: 75 / Right: 75 / Up: 75 / Down: 75 degree (typical). WF52ATZASDNN0 is built in with ST7252 or equivalent driver IC; it supports RGB 24 bits parallel interface SYNC mode. This TFT LCD WF52A module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

Item-WF52ATZASDNN0 Dimension- with O Film 
Size 5.2 inch
Dot Matrix 480 x RGBx128
Module dimension 140.4 x 49.87 x 3.0 mm
Active area 127.152 x 33.9072 mm
Dot pitch 0.0883 x 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction  6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio 7:2
Backlight Type LED, Normally White
Driver IC ST7252 or equivalent
Interface RGB 24bit
Touch Panel  CTP option ( Under development )
Surface Glare

 

 

5.2” TFT WF52A with O Film Technology
WF52ATZASDNN0 - 5.2” TFT WF52A with O Film Technology

 

 

TOP

 

Product Introduction - 5.2” WF52A O-Film with High Brightness

WF52ASZASDNN0 is a diagonal size 5.2 inch bar type TFT LCD display which featured with High Brightness and wider viewing angle of O-Film technology on module. This display is having module dimension of 140.4 x 49.87 mm and Active Area of 127.152 x 33.9072 which with the same size as WF52ATLASDNN0 but having wider viewing angle and high brightness of 800 ~850 cd/m2. This TFT display is featured with O-Film on panel having the advantages of wider viewing angle of Left: 75 / Right: 75 / Up: 75 / Down: 75 degree (typical). WF52ATLASDNN0 is built in with ST7252 or equivalent driver IC; it supports RGB 24 bits parallel interface SYNC mode. This TFT LCD WF52A module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

This 5.2 inch bar type TFT WF52A LCD display offers high quality and colorful image made of resolution 480x128 pixels; it is especially suitable for industrial equipment & automotive applications, server system, POS system, dynamic information displays, audio system and advertising display.

Item-WF52ASZASDNN0 Dimension-O Film+ High brightness
Size 5.2 inch
Dot Matrix 480 x RGB x 128
Module dimension 140.4 x 49.87 x 3.0 mm
Active area 127.152 x 33.9072 mm
Dot pitch 0.0883 x 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction  6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio 7:2
Backlight Type LED, Normally White
Driver IC ST7252 or equivalent
Interface RGB 24bit
Touch Panel  CTP option ( Under development )
Brightness 850cd/m2
WF52ASZASDNN0 - 5.2” WF52A O-Film with High Brightness

 

TOP

 

Winstar Embedded Series Introduction

Embedded systems control many devices in common use nowadays especially for industrial applications. Winstar, a professional industrial display manufacturer, launched a series of Embedded System products; we offer a variety of TFT LCD modules with motherboard solutions. Winstar ARM based Embedded series are suitable for various application fields such as POS system, medical instrument, security control, and industrial automation and automotive control electronics. Our 1st version Embedded series use the NXP processor iMx6 Series (Dual core Lite, Quad Core option) to be the control Kernel of the Motherboard. Below are features of our Winstar Embedded motherboard:

►ARM Base motherboard
►NXP Cortex-A9 Dual core 1.0GHz
►On-board DDR3 up to 2GB & 8GB eMMC NAND Flash
►Support LVDS high solution display & RGB interface
►Low power consumption
►Support Android 4.2 /Linux
►Support 5 types TFT Module from 5”~12.1”
►Support RGB & LVDS interfaces
►Temperature: -10 ℃~+60 ℃/ -20 ℃~+70 ℃
http://www.winstar.com.tw/products/embedded-motherboard.html

Winstar Embedded Series motherboard supports 5 types Winstar TFT modules; from 5” ~ 12.1”, the following list is our Part Numbers for quick selection. Detail information, please contact with our sales persons or mail to sales@winstar.com.tw.

Quick Selection:

Part No. CPU TFT Module Resolution Touch Panel Power Supply
WU-AAAA120VXXXXXXXX00 ARM Motherboard only N/A DC12V
WU-AAAA120V050BTIGX00 ARM WF50B (5.0”) 800x480 Capacitive DC12V
WU-AAAA120V050BTITX00 ARM WF50B (5.0”) 800x480 Resistive DC12V
WU-AAAA120V070BTIGX00 ARM WF70B (7.0”) 1024x600 Capacitive DC12V
WU-AAAA120V070BTITX00 ARM WF70B (7.0”) 1024x600 Resistive DC12V
WU-AAAA120V070GTIGX00 ARM WF70G (7.0”) 800x480 Capacitive DC12V
WU-AAAA120V070GTITX00 ARM WF70G (7.0”) 800x480 Resistive DC12V
WU-AAAA120V101ATIGX00 ARM WF101A (10.1”) 1024x600 Capacitive DC12V
WU-AAAA120V101ATITX00 ARM WF101A (10.1”) 1024x600 Resistive DC12V
WU-AAAA120V121ATITX00 ARM WF121A (12.1”) 1024x768 Resistive DC12V

 

TOP

 

Winstar Embedded Series Specification

Winstar Embedded system is an ARM based motherboard. It supports Android 4.2 and Linux operating systems. The Android system is available now, as to the Linux porting is under development and will be released in 2017. Below is the hardware specification for Winstar motherboard.

Form Factor
  Cpu NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional)
Processor System Technology DDR3 1GB x64 bit at 400MHz
  Capacity Onboard DDR3 1GB(2GB Max)
  Flash  4GB(8GB Max) eMMC NAND Flash for Advantech boot loader
  LVDS Dual output 24 bit LVDS(1024*600 or 1024*768)
Graphic RGB 18-bits/24-bits TTL with DE+H/V sync(800*480)
  Graphic engine 3D GPU with 1 shadow
  H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
  MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
  USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
I/O Audio Wolfson (Line out)
  Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
  SPI 2 (Host, option) 
  IIC 2 (Client, option)
  Touch 4-wire Resistive type(onboard)/ CTP is driven IIC interface  
  GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
  Consumption 2.5W
Environment Temperature -10℃~60℃/ -20℃~70℃
Dimension Motherboard  114mm * 95mm*20mm

 

 

TOP

 

 

Friendly Printing