Home Prodotti Display OLED Display OLED Grafici WEA012832D

0.91 pollici 128x32 SPI, SSD1306 Moduli Display OLED

Modello numero WEA012832D

►Tipo: grafico
►Struttura: COG+PCB
►Dimensione: 0.91 pollici
►128x32 a matrice di punti
►A bordo Controllore SSD1306BZ
►Alimentatore 3V
►1/32 duty
►Interfaccia: SPI

DESCRIZIONE

  • WEA012832DW : Bianco

 

DISEGNO

0.91 inch 128x32 SPI, SSD1306 OLED Display Module - WEA012832D - Winstar Display

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

No. Simbolo Funzione
1 SDA The I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 DC In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 2.8 ~ 3.3V Power supply pin for core logic operation.
7 VIN 4.8 ~ 5.2V Power supply pin for core logic operation.
8 GND This is a ground pin.

Dati meccanici

Articolo Dimensioni Unità
A matrice di punti (Risoluzione) 128 x 32 Dots
Dimensione del modulo 32.5 × 20.5 × 2.51 mm
Area attiva 22.384 × 5.584 mm
Dimensioni del Dot 0.152 × 0.152 mm
Passo del Dot 0.175 × 0.175 mm
Modalità display Matrice passiva
Colore display monocromatici
Drive Duty 1/32Duty
IC SSD1306BZ
Interfaccia SPI
Dimensione (Diagonale) 0.91 pollici

Valori massimi assoluti

Parameter Simbolo Valore Min Valore massimo Unità
Supply Voltage for Logic VDD 1.65 3.3 V
Supply Voltage for Logic VIN 4.0 6.0 V
Supply Voltage for Display VCC 0 16.0 V
Temperatura di lavoro TOP -40 +80 °C
Temperatura di stock TSTG -40 +85 °C

Caratteristiche elettriche

Articolo Simbolo Condition Valore Min Valore tipico Valore massimo Unità
Supply Voltage for Logic VDD 2.8 3.0 3.3 V
Supply Voltage for Logic VIN 4.8 5.0 5.2 V
Supply Voltage for Display VCC 7.0 7.5 8.0 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current ICC Vcc=7.5V 13.0 26.0 mA

Search keyword: 128x32 oled, oled 128x32, 0.91 oled, 0.91" oled, 0.91 pollici oled, oled 0.91, oled 0.91"
go top
close