Home Prodotti LCD Grafici WG20232A

Display LCD Monocromatico Grafici 202x32

Modello numero WG20232A

►Display Grafico 202x32
►LCD Monocromatico
►Built-in oscillation
►IC: SBN1661G
►1/32 duty cycle
►Alimentatore 2.85~5V
►Interfaccia: 6800/8080

DISEGNO

Winstar LCD 202x32, Monochrome Graphic Display - WG20232A
Data source ref:WG20232A-TFH-V#A

SPECIFICHE TECNICHE

Funzione dei Pin di Interfaccia

Pin No. Simbolo Level descrizione
1 VSS 0V Ground
2 VDD 5.0V Power Supply
3 VO (Variable) Operating voltage for LCD
4 A0 H/L H : Data L : Instruction
5 R/W H/L Read/Write (R/W) signal for the 68-type microcontroller
68-type microcotroller is selected as the host microcontroller, this pin should be connected to the R/W output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to read from the SBN1661G_X series. A LOW level on this pin indicates that the microcontroller intends to write to the SBN1661G_X series.
6 CS1 H/L Enable signal (E) for the 68-type microcontroller.
68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.
7 DB0 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
8 DB1 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
9 DB2 H/L This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
10 DB3 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
11 DB4 H/L This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
12 DB5 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
13 DB6 H/L This data bus is for data transfer between the host microcontroller and the SBN1661G_X.
14 DB7 H/L Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller.
15 VEE - Negative Voltage Output
16 RES H/L Hardware RESET and interface type selection.
This pin is a dual function pin. It can be used to reset the SBN1661G_X and select the type of interface timing.
17 A Power Supply for LED backlight  ( + )
18 K Power Supply for LED backlight  ( - )
19 CS2 H/L Enable signal (E) for the 68-type microcontroller.
68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.
20 CS3 H/L Enable signal (E) for the 68-type microcontroller.
If a 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series.

Dati meccanici

Articolo Dimensioni Unità
Number of dots 202 x 32
Dimensione del modulo 146.0 x 43.0 x 13.7(Max) mm
Area di visualizzazione 123.0 x 23.0 mm
Area attiva 119.16 x 18.86 mm
Dimensioni del Dot 0.57 x 0.57 mm
Passo del Dot 0.59 x 0.59 mm
Duty 1/32
Tipo di backlight LED
IC SBN1661G-M18
Interfaccia 6800

Valori massimi assoluti

Articolo Simbolo Min Valore tipico Valore massimo Unità
Temperatura di lavoro TOP -20 +70
Temperatura di stock TST -30 +80
Input Voltage VI -0.3 VDD+0.3 V
Supply Voltage For Logic VDD-VSS -0.3 +6.0 V
LCD bias voltage VLCD 3.5 13 V

Caratteristiche elettriche

Articolo Simbolo Condition Min Valore tipico Valore massimo Unità
Supply Voltage For Logic VDD-VSS 4.5 5.0 5.5 V
Supply Voltage For LCD VDD-V0 Ta=-20℃
Ta=25℃
Ta=70℃

4.8

5.0

5.2
V
V
V
Input High Volt. VIH VDD=5.0V 3.0 5.0 VDD+0.5 V
Input Low Volt. VIL 0 0.7 1.1 V
Output High Volt. VOH VDD-0.3 VDD V
Output Low Volt. VOL 0 0.3 V
Supply Current IDD VDD=5.0V 10.0 mA


Search keyword: 202x32 lcd, 202 x 32 lcd, lcd 202x32, lcd 202 x 32

Prodotti correlati

go top
close