128x128 Grafici Display LCD COG (ST75161 IC)
Modello numero WO128128B
►LCD COG
►LCD Grafico
►128×128 punti
►IC: ST75161
►Alimentatore 3.3V
►1/128 DUTY , 1/12 BIAS
►Interfaccia : 6800/8080/SPI/I2C
DISEGNO
Data source ref: WO128128B-TFH#
SPECIFICHE TECNICHE
Funzione dei Pin di Interfaccia
Pin No. | Simbolo | descrizione |
---|---|---|
1 | ESD GND | ESD Ground |
2 | VG | VG is the power of SEG-drivers. |
3 | V0 | Positive operating voltage of COM-drivers. |
4 | XV0 | Negative operating voltage of COM-drivers. |
5 | CA1P | DC/DC voltage converter |
6 | CA1N | |
7 | VDD | Power supply |
8 | VSS | Ground |
9 | COMSCN | Set scan direction of COM. |
10 | IF2 | These pins select interface operation mode. |
11 | IF1 | |
12 | IF0 | |
13 | CSB | Chip select input pin. |
14 | A0 | It determines whether the access is related to data or command. |
15 | ERD | Read / Write execution control pin. |
16 | RWR | Read / Write execution control pin. |
17-24 | RSTB | Hardware reset input pin |
25 | ERD | When using 8-bit parallel interface: 8080 or 6800 mode:8 bit bi-directional data bus When using serial interface : 4-line SPI or 3-line SPI mode D[7:4] : fix to “H” by VDD1. D[3:1] : serial input/output data (SDA). D[0] : serial input clock (SCL). D1 to D3 must be connected together (SDA) When using serial interface : I2C interface D[7] : SA[1], I2C slave address bit. Must be connected to VDD1 or VSS1. D[6] : SA[0], I2C slave address bit. Must be connected to VDD1 or VSS1. D[5:4] : fix to “H” by VDD1. D[3:2] : SDA_OUT, serial data and acknowledge output for the I2C interface. D[1] : SDA_IN, serial input data D[0] : SCL, serial input clock . D1 to D3 must be connected together (SDA) CSB must be fixed to “L” by VSS1. |
26 | A | Anode input for LED backlight. |
27 | K | Cathode input for LED backlight |
28 | ESD GND | ESD Ground |
Specifiche generali
Articolo | Dimensioni | Unità |
---|---|---|
A matrice di punti (Risoluzione) | 128 x 128 | - |
Dimensione del modulo | 68.0 x 72.0 x 6.5 | mm |
Area di visualizzazione | 62.0 x 62.0 | mm |
Area attiva | 55.01 x 55.01 | mm |
Dimensioni del Dot | 0.4 x 0.4 | mm |
Passo del Dot | 0.43 x 0.43 | mm |
Duty | 1/128 DUTY,1/12 BIAS | |
Tipo di backlight | LED | |
IC | ST75161 | |
Interfaccia | 6800/8080/3/4-Line SPI/I2C |
Valori massimi assoluti
Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|
Temperatura di lavoro | TOP | -20 | - | +70 | ℃ |
Temperatura di conservazione | TST | -30 | - | +80 | ℃ |
Tensione di alimentazione | VDD | -0.3 | - | 4.0 | V |
LCD Tensione di alimentazione | V0-XV0 | -0.3 | - | 19 | V |
Tensione di ingresso | VIN | -0.3 | - | VDD+0.3 | V |
Caratteristiche elettriche
Articolo | Simbolo | Condizione | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|---|
Tensione di alimentazione per la logica | VDD-VSS | - | 3.0 | 3.3 | 3.6 | V |
Tensione di alimentazione per LCD | VOP | Ta=-20℃ Ta=25℃ Ta=70℃ |
- 14.8 - |
- 15.1 - |
- 15.4 - |
V V V |
Ingresso alta tensione. | VIH | - | 0.7 VDD | - | VDD | V |
Ingresso bassa tensione. | VIL | - | Vss | - | 0.3 VDD | V |
Uscita alta tensione. | VOH | - | 0.8 VDD | - | VDD | V |
Uscita Bassa Volt. | VOL | - | Vss | - | 0.2 VDD | V |
Corrente di alimentazione | IDD | VDD=3.3V | - | - | 2.5 | mA |