مدل شماره WEA012864D-01

◄نوع: گرافیک
◄ساختار: COG+PCB
◄سایز: 0.96 اینچ
◄ماتریس نقطه ای 128 * 64
◄کنترلگر SSD1306BZ
◄منبع انرژی +3V+ / 5V
◄کار 1/64
◄رابط: I2C,SPI

قبلی بازگشت به فهرست بعدی

شرح

طراحی

.No	نماد	عملکرد
1	MOSI_SDA	.When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN .When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL
2	SCLK_SCL
3	DC_SA0	.In I2C mode, this pin acts as SA0 for slave address selection .When 3-wire serial interface is selected, this pin must be connected to VSS
4	RST	.This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed .Keep this pin HIGH (i.e. connect to VDD) during normal operation
5	CS	.(This pin is the chip select input. (active LOW
6	VDD	.3.0V Power supply pin for core logic operation
7	VIN	.5.0V Power supply pin for core logic operation
8	GND	This is a ground pi.n

مورد	نماد	وضعیت	مقدار حداقل	مقدار معمول	مقدار حداکثر	واحد
Supply Voltage for Logic	VDD	－	2.8	3.0	3.2	V
Supply Voltage for Logic	VIN	－	4.8	5.0	5.2	V
Supply Voltage for Display	VCC	－	7.0	7.5	8.0	V
.Input High Volt	VIH	－	0.8×VDD	－	VDDIO	V
.Input Low Volt	VIL	－	0	－	0.2×VDD	V
.Output High Volt	VOH	－	0.9×VDD	－	VDDIO	V
.Output Low Volt	VOL	－	0	－	0.1×VDD	V
50% Check Board operating Current	ICC	Vcc=7.5V	－	12.0	22.0	mA

Parameter	نماد	مقدار حداقل	مقدار حداکثر	واحد
Supply Voltage for Logic	VDD	1.65	3.3	V
Supply Voltage for Logic	VIN	4.0	6.0	V
Supply Voltage for Display	VCC	0	16.0	V
دمای عملیاتی	TOP	-40	+80	°C
دمای بسته‌بندی	TSTG	-40	+85	°C

Search keyword: 128x64 oled, oled 128x64, 0.96 oled, 0.96" oled, 0.96 inch oled, oled 0.96, oled 0.96"