Home محصولات COG LCD WO240128B2

مدل شماره WO240128B2

◄COG LCD
◄LCD گرافیکی
◄240 × 128 نقطه
◄کنترلگر ST7586S
◄منبع انرژی +3.3V
◄1/128 چرخه کار
◄رابط: Default 6800, Option 8080, SPI-4 Line/SPI-3Line 9bit

طراحی

Chip on Glass  LCD Module 240x128 with PCB - WO240128B2
Data source ref: WO240128B2-TFH#

مشخصات

عملکرد پین رابط

Pin No. Symbol Description
1 VDD Power supply
2 NC No connection
3 VSS Ground
4 CSB Chip select input pin
CSB=“L”: This chip is selected and the MPU interface is active
CSB=“H”: This chip is not selected and the MPU interface is disabled
(D[7:0] are high impedance)
5 RSTB Reset input pin. When RSTB is “L”, internal initialization procedure is executed
6 E Read / Write control input pin.
R/W = “H”: When E is “H”, data bus is in output status.
R/W = “L”: The data are latched at the falling edge of the E signal.
7~14 D7~D0 The bi-directional data bus of the MPU interface. When CSB is “H”, they are high impedance
15 R/W Read / Write control input pin
R/W = “H” : read
R/W = “L” : write
16 A0 The function of this pin is different in parallel and serial interface
In parallel interface: A0 is register selection input
A0 = "H": inputs on data bus are display data
A0 = "L": inputs on data bus are command
17 A LED+
18 K LED-

داده مکانیکی

مورد ابعاد ماژول واحد
وضوح 240 × 128
ابعاد ماژول 140.0 × 84.0 × 9.7 mm
ناحیه در حال نمایش 114.0 × 64.0 mm
ناحیه فعال 107.98 × 57.58 mm
اندازه نقطه 0.43 × 0.43 mm
درجه نقطه 0.45 × 0.45 mm
روش درایو 1/128 Duty,1/12 Bias
نوع نور پس‌زمینه LED
IC ST7586S
رابط 6800

بیشینه مقادیر مجاز مطلق

مورد نماد مقدار حداقل مقدار معمول مقدار حداکثر واحد
دمای عملیاتی TOP -20 +70
دمای بسته‌بندی TST -30 +80
Digital Power Supply Voltage VDDI -0.3 3.6 V
Analog Power supply voltage VDDA -0.3 3.6 V
LCD Power supply voltage V0-XV0 -0.3 19 V
LCD Power supply voltage VG -0.3 5.5 V

مشخصات الکترونیکی

مورد نماد وضعیت مقدار حداقل مقدار معمول مقدار حداکثر واحد
Supply Voltage For Logic VDD-VSS 3.0 3.3 3.6 V
Supply Voltage For LCM VOP Ta=-20℃
Ta=25℃
Ta=+70℃

14.8

15.0

15.2
V
V
V
.Input High Volt VIH 0.7VDD VDD V
.Input Low Volt VIL VSS 0.3 VDD V
.Output High Volt VOH 0.8 VDD VDD V
.Output Low Volt VOL VSS 0.2VDD V
.Supply Current IDD VDD=3.3V 2.0 4.0 mA
go top
close