N° de modèle WF101JTYAHLNT0
►Dimension 10.1 pouces
►Résolution d’écran: 1024×600 points
►Vue préférentielle IPS
►Interface: LVDS
►CI pilote : EK79001HN + EK73215BCGA
►Carte de contrôle: No
►Luminosité (Cd/m²): 350
►Cadre de maintien avec points de fixation: NON
►Dalle tactile: Avec dalle tactile résistive (RTP)
DESSIN
SPÉCIFICATIONS
Interface
TFT LCD Module
Pin No. | Symbole | Function |
---|---|---|
1 | VCOM | Common voltage |
2 | VDD | Digital power |
3 | VDD | Digital power |
4 | NC | Not connect |
5 | Reset | Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF) |
6 | STBYB | Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
7 | GND | Digital ground |
8 | RXIN0- | Negative LVDS differential data inputs |
9 | RXIN0+ | Positive LVDS differential data inputs |
10 | GND | Digital ground |
11 | RXIN1- | Negative LVDS differential data inputs |
12 | RXIN1+ | Positive LVDS differential data inputs |
13 | GND | Digital ground |
14 | RXIN2- | Negative LVDS differential data inputs |
15 | RXIN2+ | Positive LVDS differential data inputs |
16 | GND | Digital ground |
17 | RXCLKN- | Negative LVDS differential clock inputs |
18 | RXCLKN+ | Positive LVDS differential clock inputs |
19 | GND | Digital ground |
20 | RXIN3- | Negative LVDS differential data inputs |
21 | RXIN3+ | Positive LVDS differential data inputs |
22 | GND | Digital ground |
23 | NC | Not connect |
24 | NC | Not connect |
25 | GND | Digital ground |
26 | NC | Not connect |
27 | NC | Not connect |
28 | SELB | 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit |
29 | AVDD | Analog power |
30 | GND | Digital ground |
31 | LED- | LED Cathode |
32 | LED- | LED Cathode |
33 | L/R | Left or right display control |
34 | U/D | Up / down display control |
35 | VGL | Negative power for TFT |
36 | NC | Not connect |
37 | NC | Not connect |
38 | VGH | Positive power for TFT |
39 | LED+ | LED Anode |
40 | LED+ | LED Anode |
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.
Spécifications générales
Article | Dimensions | Unité |
---|---|---|
Screen Diagonal | 10.1 | pouce |
Number of Pixels | 1024 RGB x 600 | points |
Dimensions du module | 235(W) x 143(H) x 6.65(D) | mm |
Zone active | 222.72 (H) x 125.28(V) | mm |
Pixel pitch | 0.2175(W) x 0.2088(H) | mm |
Type de LCD | TFT, Noir, Transmissif | |
Interface | LVDS | |
CI pilote | EK79001HN + EK73215BCGA ou équivalent | |
Vue préférentielle | 85/85/85/85 | |
Rapport d'aspect | 16:9 | |
Type de rétroéclairage | LED, Blanc | |
Avec/sans dalle tactile | Avec dalle tactile résistive | |
Surface | Anti-reflets |
Valeurs nominales maximales absolues
Article | Symbole | Min | Typ | Max | Unité |
---|---|---|---|---|---|
Température de fonctionnement | TOP | -20 | - | +70 | ℃ |
Température de stockage | TST | -30 | - | +80 | ℃ |
Caractéristiques électroniques
Typical Operation Conditions (At Ta = 25 °C,)
Article | Symbole | Min | Typ | Max | Unité |
---|---|---|---|---|---|
Digital Power Supply Voltage For LCD | VDD | 3 | 3.3 | 3.6 | V |
Analog Power Supply Voltage | AVDD | 9.89 | 10.2 | 10.5 | V |
Gate On Power Supply Voltage | VGH | 19.4 | 20.0 | 20.6 | V |
Gate Off Power Supply Voltage | VGL | -10.3 | -10.0 | -9.7 | V |
Common Power Supply Voltage | VCOM | 4.0 | 4.3 | 4.6 | V |
Input logic high voltage | VIH | 0.7 VDD | - | VDD | V |
Input logic low voltage | VIL | 0 | - | 0.3 VDD | V |