Accueil Produits Afficheur TFT Afficheur TFT haute luminosité WF123BSWAYLNB0

Écran LCD IPS TFT 12.3", 1920x720 (PCAP, LVDS)

N° de modèle WF123BSWAYLNB0

►Dimension 12.3 pouces
►Résolution d’écran: 1920x720 points
►Vue préférentielle: 85/85/85/85 (IPS)
►Interface : 2ch-LVDS
►Contrôleur intégré: --
►Carte de contrôle: NON
►Luminosité(cd/m²): 650
►Trou dans le cadre: NON
►Dalle tactile: Avec dalle tactile capacitive (PCAP)
►Detect Point : 10 Fingers
►Température d’utilisation: -30~+85℃

DESSIN

IPS 12.3, 12.3 IPS Display, IPS 12.3 inch TFT Display 1920x720 with PCAP, LVDS Interface - WF123BSWAYLNB0

SPÉCIFICATIONS

Fonction PIN sur l'interface

TFT LCD Module

FPC connector is used for electronics interface.
AORORA F31L-1A7H1-21050 , 50PIN

Pin no. Symbole Fonction
1 GND Ground
2 NC No connector
3 VCC Digital Power
4 VCC Digital Power
5 GND Panel Power
6 GND Panel Power
7 NC No connector
8 NC No connector
9 GND Ground
10 ORXIN0- Odd pixel negative LVDS differential clock input
11 ORXIN0+ Odd pixel positive LVDS differential clock input
12 ORXIN1- Odd pixel negative LVDS differential clock input
13 ORXIN1+ Odd pixel positive LVDS differential clock input
14 ORXIN2- Odd pixel negative LVDS differential clock input
15 ORXIN2+ Odd pixel positive LVDS differential clock input
16 ORXCLKIN- Odd pixel negative LVDS differential clock input
17 ORXCLKIN+ Odd pixel positive LVDS differential clock input
18 ORXIN3- Odd pixel negative LVDS differential clock input
19 ORXIN3+ Odd pixel positive LVDS differential clock input
20 ERXIN0- Even pixel negative LVDS differential clock input
21 ERXIN0+ Even pixel positive LVDS differential clock input
22 ERXIN1- Even pixel negative LVDS differential clock input
23 ERXIN1+ Even pixel positive LVDS differential clock input
24 ERXIN2- Even pixel negative LVDS differential clock input
25 ERXIN2+ Even pixel positive LVDS differential clock input
26 ERXCLKIN- Even pixel negative LVDS differential clock input
27 ERXCLKIN+ Even pixel positive LVDS differential clock input
28 ERXIN3- Even pixel negative LVDS differential clock input
29 ERXIN3+ Even pixel positive LVDS differential clock input
30 GND Ground
31 NC No connector
32 RESETB Global reset pin, active low.
33 STBYB Standby mode, active low.
34 CA3 Output signal to indicate self protection mode, when DE,HS,VS,DCLK, any of these signals is missing, it will become High. If using this pin, CA3 need to pulled low by an resistor,else , let it floating.
35 SCL Serial interface clock input. (User folating)
36 SDA Serial interface data input/output.(User folating)
37 CSB Serial interface chip enable.(User folating)
38 GND Power Ground
39 GND Power Ground
40 NC No connector
41 LEDA LED power (Anode)
42 LEDA LED power (Anode)
43 LEDA LED power (Anode)
44 NC No connector
45 LEDK1 Cathode 1
46 LEDK2 Cathode 2
47 LEDK3 Cathode 3
48 LEDK4 Cathode 4
49 NTC_A NTC_Anode
50 NTC_K NTC_Cathode
 

PCAP PIN Definition

Pin Symbole Fonction
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

Spécifications générales

Article Dimensions Unité
Dimension 12.3 pouces
Pixel Number 1920 RGB (H) × 720(V) pixel
Dimensions du module 364.0(H) × 175.0 (V) × 10.48 mm
Zone active 292.032(H) × 109.512(V) mm
Pas des points 0.1521(H) × 0.1521 (V) mm
Type de LCD TFT, Noir, Transmissif
Angle de vue 85/85/85/85
Type de rétroéclairage LED, Blanc
TFT Interface 2ch-LVDS
PCAP IC ILI2511 ou équivalent
PCAP Interface USB (I2C available)
Version PCAP FW V6.0.0.0.0.0.0.3
Dalle tactile Avec dalle tactile capacitive,PCA
Surface Reflets

Valeurs nominales maximales absolues

Article Symbole Valeur min Valeur type Valeur max Unité
Température de fonctionnement TOP -30 +85
Température de stockage TST -40 +85

Caractéristiques électroniques

Article Symbole Valeur min Valeur type Valeur max Unité
Supply Voltage VCC 3 3.3 3.6 V
Input signal voltage ViH VCC *0.7 - VCC V
ViL 0 - VCC *0.3 V
Current of power supply ICC - - 500 mA
Inrush current IRUSH - - 2.0 A
Supply PCAP (USB) USB_VDD 5V 4.75 5.0 5.25 V
I USB_VDD - 90 135 mA
Supply PCAP (I2C) VDDT 3.3 3.15 3.3 3.45 V
IVDDT - 90 135 mA
go top
close