N° de modèle WG20232A
►LCD graphique 202x32
►Horloge intégrée
►IC: SBN1661G
►Taux de rafraichissement 1/32 duty cycle
►Alimentation 2.85~5V
►Interface: 6800/8080
| Pin No. | Symbole | Level | Description |
|---|---|---|---|
| 1 | VSS | 0V | Ground |
| 2 | VDD | 5.0V | Power Supply |
| 3 | VO | (Variable) | Operating voltage for LCD |
| 4 | A0 | H/L | H : Data L : Instruction |
| 5 | R/W | H/L | Read/Write (R/W) signal for the 68-type microcontroller 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the R/W output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to read from the SBN1661G_X series. A LOW level on this pin indicates that the microcontroller intends to write to the SBN1661G_X series. |
| 6 | CS1 | H/L | Enable signal (E) for the 68-type microcontroller. 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series. |
| 7 | DB0 | H/L | Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller. This data bus is for data transfer between the host microcontroller and the SBN1661G_X. |
| 8 | DB1 | H/L | Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller. |
| 9 | DB2 | H/L | This data bus is for data transfer between the host microcontroller and the SBN1661G_X. |
| 10 | DB3 | H/L | Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller. |
| 11 | DB4 | H/L | This data bus is for data transfer between the host microcontroller and the SBN1661G_X. |
| 12 | DB5 | H/L | Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller. |
| 13 | DB6 | H/L | This data bus is for data transfer between the host microcontroller and the SBN1661G_X. |
| 14 | DB7 | H/L | Bi-direction, tri-state 8-bit parallel data bus for interface with a host microcontroller. |
| 15 | VEE | - | Negative Voltage Output |
| 16 | RES | H/L | Hardware RESET and interface type selection. This pin is a dual function pin. It can be used to reset the SBN1661G_X and select the type of interface timing. |
| 17 | A | － | Power Supply for LED backlight ( + ) |
| 18 | K | － | Power Supply for LED backlight ( - ) |
| 19 | CS2 | H/L | Enable signal (E) for the 68-type microcontroller. 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series. |
| 20 | CS3 | H/L | Enable signal (E) for the 68-type microcontroller. If a 68-type microcotroller is selected as the host microcontroller, this pin should be connected to the ENABLE output of the microcontroller. A HIGH level on this pin indicates that the microcontroller intends to select the SBN1661G_X series. |
| Article | Dimensions | Unité |
|---|---|---|
| Number of dots | 202 x 32 | － |
| Dimensions du module | 146.0 x 43.0 x 13.7(Max) | mm |
| Zone d'affichage | 123.0 x 23.0 | mm |
| Zone active | 119.16 x 18.86 | mm |
| Taille des points | 0.57 x 0.57 | mm |
| Pas des points | 0.59 x 0.59 | mm |
| Duty | 1/32 | |
| Type de rétroéclairage | LED | |
| IC | SBN1661G-M18 | |
| Interface | 6800 | |
| Article | Symbole | Min | Typ | Max | Unité |
|---|---|---|---|---|---|
| Température de fonctionnement | TOP | -20 | － | +70 | ℃ |
| Température de stockage | TST | -30 | － | +80 | ℃ |
| Input Voltage | VI | -0.3 | － | VDD+0.3 | V |
| Supply Voltage For Logic | VDD-VSS | -0.3 | － | +6.0 | V |
| LCD bias voltage | VLCD | 3.5 | － | 13 | V |
| Article | Symbole | État | Min | Typ | Max | Unité |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD-VSS | － | 4.5 | 5.0 | 5.5 | V |
| Supply Voltage For LCD | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
－ 4.8 － |
－ 5.0 － |
－ 5.2 － |
V V V |
| Input High Volt. | VIH | VDD=5.0V | 3.0 | 5.0 | VDD+0.5 | V |
| Input Low Volt. | VIL | － | 0 | 0.7 | 1.1 | V |
| Output High Volt. | VOH | － | VDD-0.3 | － | VDD | V |
| Output Low Volt. | VOL | － | 0 | － | 0.3 | V |
| Supply Current | IDD | VDD=5.0V | － | 10.0 | － | mA |
Search keyword: 202x32 lcd, 202 x 32 lcd, lcd 202x32, lcd 202 x 32
En cliquant sur "Autoriser tous les cookies", vous acceptez le stockage de cookies sur votre appareil pour améliorer la navigation sur le site, analyser l'utilisation du site et aider dans nos efforts de marketing et de performance. Vous pouvez trouver plus d'informations à ce sujet dans notre politique. Politique de confidentialité
