Accueil Produits Système embarqué WUABAB120V121BTXGX00 / WUABLB120V121BTXGX00

N° de modèle WUABAB120V121BTXGX00 / WUABLB120V121BTXGX00

►WUABAB Series : Android OS
►WUABLB Series : Linux Yocto OS
►Without WIFI

►TFT Dimension: 12.1"
►Interface: LVDS
►Dalle tactile: Avec dalle tactile capacitive (PCAP)

Carte mère embarquée:
►NXP Cortex-A9 Dual lite @ 1.0GHz
►DDR3 intégrée jusqu'à 1 Go et Flash NAND eMMC 8 Go
►Prend en charge la solution d'affichage en hauteur LVDS, l'interface RVB et HDMI(1920*1080)
►Full HD Decoder, 2D/3D, OpenGL ES2.0 or up
►Faible consommation électrique
►Prend en charge Android 4.4.2 /Linux yocto Daisy 1.6 (QT Included)
►Prend en charge de modules TFT de 5” à 12,1” (Prend en charge RGB & LVDS)

DESSIN

WUABAB120V+ 121B series (PCAP) / LVDS Interface
WUABLB120V+ 121B series (PCAP) / LVDS Interface

12.1 PCAP TFT Module (LVDS) with Linux / Android Embedded Single Board Computer - Winstar Display

SPÉCIFICATIONS

Spécifications Carte mère embarquée

Processor System CPU iMX6 DL - Dual core 1.0GHz (Dual core up to 1GHz per core)
Memory Memory Onboard DDR3L 1GB x64 bit
  Mass storage On-board eMMC drive, up to 8GB
Video LVDS 24 bit LVDS (1024*600、1280*800)
  RGB 24-bits TTL with DE+ H/V sync (800*480)
  HDMI V1.4 (1920*1080)
Graphic Graphic engine Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator (Supports OpenGL ES2.0 3D)
  H/W Video codec Support MPEG 1/2/4, H.264 Hardware Decoder.
  Display Support 2 types independent display with iMX6DL and i.MX6D/Q
Network Ethernet 1 GbE + IEEE1588 with RJ45 slot
  WIFI/BT BLE 4.0 (internal USB for option WIFI Module, Optional Parts)
USB USB 2 Standard USB 2.0 type A ; 1 x USB 2.0 OTG
    2*USB2.0 with pin header
Audio Audio WM8903 Audio codec with 3.5 mm stereo jack
    Mic in, Line out internal pin header
I/O Serial port 4 x RS232 (3 x ePH connector, 1x ePHD for console,) ; 
    1 x RS485 (1 x ePH connector)
  IIC 1 (Client, for PCAP use)
  GPIO 32-pin 3.3V TTL Level GPIOs / 2-pin TTL PWM output
Touch Panel Resistive 4-wire Resistive type (onboard)
  Capacitive CTP is driven IIC interface
Clock RTC RTC Circuitry for low power consumption with Battery on-board
Expansion SD Socket 1 *μSD Slot (support up to SDXC)
Power Voltage DC9V ~ DC24V±10%
  Consumption 2.5W
Environment Temperature -20℃ ~ 70℃ (Operating)
    -30℃ ~ 80℃ (Storage)
Operating System   Android 4.4.2 or Linux Yocto Daisy 1.6
Dimension   130mm * 95mm * 20mm
Certification   CE/FCC

Architecture

Dimension

Architecture - Dimension

Block Diagram

The diagram shows the connection of IC components and devices.

2.2	Block Diagram

Position of Connector and Pin header

Position on Connector and Pin Header
Connector No. Description Connector No. Description
J2(J8) DC Power Jack J15 RS485 port
J5 Micro SD Card Slot J11 Audio input interface
J6 USB port in Type A connector J12 Audio output interface
J7 Ethernet in RJ45 Slot J19 RTP interface
J22 GPIO port1 J4 3.5mm Earphone+ Micro phone
J24 GPIO port2 J1 USB OTG interface
J9, J20 USB port in pin header J25 I2C interface for CTP(PCAP)
J16, J18,J26 RS232 port J14 RGB LCD interfaces
J23 RS232 for Console J3 HDMI (1920*1080)
J10 LVDS LCD interfaces    
SW2 Display selection switch    

Spécifications TFT

Spécifications générales

Article Dimensions Unité
Diagonale 12.1 pouces
Résolution 1280 × RGB × 800(TFT) points
Dimensions du module 278.0(W) ×184.0(H) × 13.0(D) mm
Zone active 261.12 (H) × 163.2(V) mm
Pas des points 0.204(W) × 0.204(H) mm
Type de LCD TFT, Noir, Transmissif
Vue préférentielle 12 o'clock
Inversion de sens de l'échelle de gris 6 o'clock
Rapport d'aspect 16:9
Type de rétroéclairage LED, Blanc
Dalle tactile Avec dalle tactile capacitive (PCAP)
Interface LVDS
Surface Reflets

Valeurs nominales maximales absolues

Article Symbole Valeur min Valeur type Valeur max Unité
Température de fonctionnement TOP -20 +70
Température de stockage TST -20 +80
go top
close