Accueil Produits Afficheur COG WO12864M

N° de modèle WO12864M

►Afficheur COG 128x64
►Afficheur graphique
►IC: ST7567
►Alimentation 3V
►Taux de rafraichissement 1/65 duty cycle
►Interface : 6800/8080/SPI

DESSIN

WO12864M

 

Data source ref: WO12864M-TFH#

SPÉCIFICATIONS

Fonction PIN sur l'interface

Pin No. Symbole Description
1 PSB This pin configures the interface to be parallel mode or serial mode.
2 C86 C86 selects the microprocessor type in parallel interface mode
3 NC No connection
4 NC No connection
5 NC No connection
6 NC No connection
7 NC No connection
8 VG LCD driving voltage for segment circuits
9 XV0 XV0 is the LCD driving voltage for common circuits at positive frame
10 V0 LCD driving voltage for common circuits at negative frame
11 NC No connection
12 NC No connection
13 NC No connection
14 NC No connection
15 Vss Ground
16 VDD Power
17 D7 Data bus
18 D6 Data bus
19 D5 Data bus
20 D4 Data bus
21 D3 Data bus
22 D2 Data bus
23 D1 Data bus
24 D0 Data bus
25 ERD Read execution control pin
26 RWR Write execution control pin
27 A0 It determines whether the access is related to data or command.
A0=“H” : Indicates that signals on D[7:0] are display data.
A0=“L” : Indicates that signals on D[7:0] are command.
28 RSTB Hardware reset input pin
29 CSB Chip select input pin

Spécifications générales

Article Dimensions Unité
Matrice de points (Résolution) 128 x 64 dots
Dimensions du module 60.1 x 44.5 x 5.01(MAX) mm
Zone d'affichage 54.6 x 32.0 mm
Zone active 49.89 x 27.49 mm
Taille des points 0.36 x 0.4 mm
Pas des points 0.39 x 0.43 mm
Duty 1/65 , 1/9 Bias
Type de rétroéclairage LED
IC ST7567
Interface 6800/8080/4-Line SPI

Valeurs nominales maximales absolues

Article Symbole Valeur min Valeur type Valeur max Unité
Température de fonctionnement TOP -20 +70
Température de stockage TST -30 +80
Input Voltage VI -0.3 VDD+0.3 V
Digital Power Supply Voltage VDD-Vss -0.3 3.6 V
LCD Power supply voltage V0-XV0 -0.3 16 V

Caractéristiques électroniques

Article Symbole État Valeur min Valeur type Valeur max Unité
Supply Voltage For Logic VDD-VSS 2.7 3.0 3.3 V
Supply Voltage For LCD VOP Ta=-20℃
Ta=25℃
Ta=70℃

9.15

9.45

9.75
V
V
V
Input High Volt. VIH 0.7 VDD VDD V
Input Low Volt. VIL Vss 0.3VDD V
Output High Volt. VOH 0.8 VDD VDD V
Output Low Volt. VOL Vss 0.2 VDD V
Supply Current IDD VDD=3.0V 0.45 0.9 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close