Pantalla TFT 3.5" de amplia temperatura
Modelo Nº WF35TTNACDNN0
►Tamaño : 3.5 pulgada
►Resolución : 320 x 240 pontos
►Dirección de la vista : 12H
►Interfaz : RGB
►IC Part No. : --
►Placa de control : No
►Brillo (cd/m²) : 420
►Agujero del bastidor : No
►Pantalla táctil : Sin panel táctil
►Temperatura de funcionamiento : -30~+80℃
DIBUJO

ESPECIFICACIONES
Función interfaz Pin
LCM PIN Definition
Pin | Símbolo | Función |
---|---|---|
1 | LED- | Power for LED backlight cathode |
2 | LED- | Power for LED backlight cathode |
3 | LED+ | Power for LED backlight anode |
4 | LED+ | Power for LED backlight anode |
5 | NC | No connect |
6 | NC | No connect |
7 | NC | No connect |
8 | /RESET | Hardware reset |
9 | CSB | Chip select pin of serial interface |
10 | SCL | Clock pin of serial interface |
11 | SDA | Data input pin in serial mode |
12 | B0 | Blue Data bus0 |
13 | B1 | Blue Data bus1 |
14 | B2 | Blue Data bus2 |
15 | B3 | Blue Data bus3 |
16 | B4 | Blue Data bus4 |
17 | B5 | Blue Data bus5 |
18 | B6 | Blue Data bus6 |
19 | B7 | Blue Data bus7 |
20 | G0 | Green Data bus0 |
21 | G1 | Green Data bus1 |
22 | G2 | Green Data bus2 |
23 | G3 | Green Data bus3 |
24 | G4 | Green Data bus4 |
25 | G5 | Green Data bus5 |
26 | G6 | Green Data bus6 |
27 | G7 | Green Data bus7 |
28 | R0 | Red Data bus0 / DX0 |
29 | R1 | Red Data bus1 / DX1 |
30 | R2 | Red Data bus2 / DX2 |
31 | R3 | Red Data bus3 / DX3 |
32 | R4 | Red Data bus4 / DX4 |
33 | R5 | Red Data bus5 / DX5 |
34 | R6 | Red Data bus6 / DX6 |
35 | R7 | Red Data bus7 / DX7 |
36 | HSYNC | Line synchronization signal (Fix to GND when not in use) |
37 | VSYNC | Frame synchronization signal (Fix to GND when not in use) |
38 | DCLK | Dot-clock signal and oscillator source |
39 | NC | No connect |
40 | NC | No connect |
41 | VCC | Power Supply |
42 | VCC | Power Supply |
43 | NC | No connect |
44 | NC | No connect |
45 | NC | No connect |
46 | NC | No connect |
47 | NC | No connect |
48 | IF2 | Input pin to select input interface mode |
49 | IF1 | Input pin to select input interface mode |
50 | NC | No connect |
51 | NC | No connect |
52 | DE | Display enable pin from controller. Internal pull high Connect to VCCIO or floating if not used (Fix to GND when not in use) |
53 | GND | Ground. |
54 | GND | Ground. |
Especificaciones generales
Elemento | Dimensión | Unidad |
---|---|---|
Tamaño | 3.5 | pulgada |
Matriz de puntos | 320 × RGB × 240(TFT) | dots |
Dimensión del módulo | 76.9(W) × 63.9(H) × 3.1(D) | mm |
zona activa | 70.08 × 52.56 | mm |
Distancia entre puntos | 0.073 × 0.219 | mm |
Tipo de LCD | TFT, Blanco, Transmisivo | |
Dirección de la vista | 12 o'clock | |
Dirección de inversión de escala de grises | 6 o'clock | |
Tipo de retroiluminación | LED, Blanco | |
Con o sin panel táctil | Sin pantalla táctil | |
Relación de aspecto | 4:3 | |
Superficie | Deslumbramiento |
Valores nominales máximos absolutos
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Temperatura de funcionamiento | TOP | -30 | - | +80 | ℃ |
Temperatura de almacenamiento | TST | -30 | - | +80 | ℃ |
Características electrónicas
Elemento | Símbolo | Condition | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|---|
Supply Voltage For LCM | Vcc | - | 3.0 | 3.3 | 3.6 | V |
Supply Current For LCM | Icc | - | - | 8.6 | 15 | mA |