TFT de Alto brillo 7 pulgada (PCAP)
Modelo Nº WF70A2SIAGDNGA
►Tamaño : 7 pulgada
►Resolución : 800x480 pontos
►Dirección de la vista: 12H
►Interfaz : RGB
►Controlador IC: Source IC: ST-5623D, Gate IC: ST5091D
►Placa de control : No
►Brillo(cd/m²) : 700
►►Agujero del bastidor : No
►Pantalla táctil: panel táctil capacitivo (PCAP)
►Detect Point : 5 Fingers
DIBUJO
ESPECIFICACIONES
Función interfaz Pin
LCM PIN Definition
Pin | Símbolo | Función |
---|---|---|
1 | LED+ | Power supply for backlight |
2 | LED+ | Power supply for backlight |
3 | LED- | Backlight ground |
4 | LED- | Backlight ground |
5 | GND | Power ground |
6 | VCOM | Common voltage |
7 | VCC | Power for Digital Circuit |
8 | MODE | DE/SYNC mode select |
9 | DE | Data Input Enable |
10 | VS | Vertical Sync Input |
11 | HS | Horizontal Sync Input |
12 | B7 | Blue data(MSB) |
13 | B6 | Blue data |
14 | B5 | Blue data |
15 | B4 | Blue data |
16 | B3 | Blue data |
17 | B2 | Blue data |
18 | B1 | Blue data |
19 | B0 | Blue data(LSB) |
20 | G7 | Green data(MSB) |
21 | G6 | Green data |
22 | G5 | Green data |
23 | G4 | Green data |
24 | G3 | Green data |
25 | G2 | Green data |
26 | G1 | Green data |
27 | G0 | Green data(LSB) |
28 | R7 | Red data(MSB) |
29 | R6 | Red data |
30 | R5 | Red data |
31 | R4 | Red data |
32 | R3 | Red data |
33 | R2 | Red data |
34 | R1 | Red data |
35 | R0 | Red data(LSB) |
36 | GND | Power Ground |
37 | DCLK | Sample clock (CLK) |
38 | GND | Power Ground |
39 | L/R | Left / right selection |
40 | U/D | Up/down selection |
41 | VGH | Gate ON Voltage |
42 | VGL | Gate OFF Voltage |
43 | AVDD | Power for Analog Circuit |
44 | RESET | Global reset pin. |
45 | NC | No connection |
46 | VCOM | Common Voltage |
47 | DITHB | Dithering function |
48 | GND | Power Ground |
49 | NC | No connection |
50 | NC | No connection |
PCAP PIN Definition
Pin | Símbolo | Función |
---|---|---|
1 | VSS | Ground for analog circuit |
2 | VDDT | Power Supply : +3.3V |
3 | SCL | I2C clock input |
4 | NC | No connect |
5 | SDA | I2C data input and output |
6 | NC | No connect |
7 | RST | External Reset, Low is active |
8 | NC | No connect |
9 | INT | External interrupt to the host |
10 | VSS | Ground for analog circuit |
Especificaciones generales
Elemento | Dimensión | Unidad |
---|---|---|
Tamaño (Diagonal) | 7 | pulgada |
Matriz de puntos (Resolución) | 800 x RGB x 480 (TFT) | puntos |
Dimensión del módulo | 165 x 100.0 x 7.45 | mm |
zona activa | 154.08 x 85.92 | mm |
Distancia entre puntos | 0.1926 X 0.179 | mm |
Tipo de LCD | TFT, Blanco, Transmisivo | |
Dirección de la vista | 12 o'clock | |
Dirección de inversión de escala de grises | 6 o'clock | |
Relación de aspecto | 16:9 | |
Tipo de retroiluminación | LED, Blanco | |
TFT Interfaz | 24-bit RGB | |
Color arrangement | RGB-STRIPE | |
Driver IC | Source IC: ST-5623D, Gate IC: ST5091D | |
PCAP IC | ILI2130 o equivalente | |
PCAP Interfaz | I2C | |
PCAP FW Versión | 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01 | |
PCAP Resolution | 16384*16384 | |
Pantalla táctil | Con panel táctil capacitivo | |
Superficie | Deslumbramiento |
Valores nominales máximos absolutos
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Temperatura de funcionamiento | TOP | -20 | - | +70 | ℃ |
Temperatura de almacenamiento | TST | -30 | - | +80 | ℃ |
Características electrónicas
Operating conditions:
Elemento | Símbolo | Valor mín. | Valor típico | Valor máx. | Unidad |
---|---|---|---|---|---|
Supply Voltage For Logic | VCC | 3.0 | 3.3 | 3.6 | V |
Supply PCAP | VDDT | 3.0 | 3.3 | 3.6 | V |
ICTP | - | 65 | 98 | mA | |
Power voltage | AVDD | - | 10.4 | - | V |
Power Supply For Current | VCC =3.3V | - | 4.3 | - | mA |
Power voltage | VGH | 14.5 | 15.0 | 15.5 | V |
Power voltage | VGL | -10.5 | -10 | -9.5 | V |
Input signal voltage | VCOM | 3.54 | 4.04 | 4.54 | V |