Home Productos Pantalla TFT Pantalla TFT tipo barra WF52QTZBSDBN0

Pantalla TFT LCD SSD1963 barra 5.2 pulgada

Modelo Nº WF52QTZBSDBN0

►Tamaño : 5.2 pulgada
►Resolución : 480 x 128 pontos
►Dirección de la vista : 6H
►Interfaz : 8080, MPU
►Controlador IC : SSD1963
►Placa de control : Yes
►Brillo (cd/m²): 400
►Agujero del bastidor : Yes
►Pantalla táctil : Solo retroiluminación LED blanca
►O-Film : Yes

DIBUJO

ESPECIFICACIONES

Función interfaz Pin

LCM PIN Definition (CON4)
Pin Símbolo Función
1 GND System round pin of the IC. Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RESET Hardware reset
27 LR Right /Left selection; Default R/L is Pull High
28 UD Up/down selection; Default U/D is Pull High
29~32 NC No connection
33 VLED- VLED- for B/L LED inverter (GND)
34 VLED- VLED- for B/L LED inverter (GND)
35 VLED+ VLED+ for B/L LED inverter (+5V)
36 VLED+ VLED+ for B/L LED inverter (+5V)

LCM PIN Definition (CON1)
Pin Símbolo Función
1 NC(FG) No connect (Frame Grand)
2 GND System round pin of the IC. Connect to system ground.
3 VDD Power Supply : +3.3V
4 BLE Backlight control signal , H: On \ L: Off
5 WR Write strobe signal
6 RD Read strobe signal
7 CS Chip select
8 D/C Data/Command select
9 NC No connect
10 RESET Hardware reset
11~18 DB0~DB7 Data bus
19~20 NC No connect
21 VLED+ VLED+ for B/L LED inverter (+5V)
22 VLED- VLED- for B/L LED inverter (GND)
23~25 NC No connect
26 GND Hardware reset

Especificaciones generales

Elemento Dimensión Unidad
Tamaño 5.2 pulgada
Matriz de puntos 480 × RGB × 128 dots
Dimensión del módulo 180.0 × 65.0 × 8.8 mm
zona activa 127.152 × 33.9072 mm
Distancia entre puntos 0.0883 × 0.2649 mm
Tipo de LCD TFT, Blanco, Transmisivo
Dirección de la vista 6 o'clock
Dirección de inversión de escala de grises 12 o'clock
Relación de aspecto Bar Type
Tipo de retroiluminación LED, Blanco
Controlador IC SSD1963
Interfaz Digital 8080 family MPU 8bit/16bit
Con o sin panel táctil Sin panel táctil
Superficie Deslumbramiento

Valores nominales máximos absolutos

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Temperatura de funcionamiento TOP -20 +70
Temperatura de almacenamiento TST -30 +80

Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 mA
go top
close