Home Productos Placa base integrada WUABAB120V121BTXGX00 / WUABLB120V121BTXGX00

Modelo Nº WUABAB120V121BTXGX00 / WUABLB120V121BTXGX00

►WUABAB Series : Android OS
►WUABLB Series : Linux Yocto OS
►Without WIFI

►TFT Tamaño: 12.1"
►Interfaz : LVDS
►Pantalla táctil: Con panel táctil capacitivo

Embedded Single Board Computer Features:
►NXP Cortex-A9 Dual lite @ 1.0GHz
►Placa DDR3 de hasta 1GB y 8GB de memoria Flash NAND eMMC
►Admite pantalla de alta resolución LVDS, interfaz RGB e HDMI(1920*1080)
►Full HD Decoder, 2D/3D, OpenGL ES2.0 or up
►Bajo consumo de energía
►Admite Android 4.4.2
►Admite módulo TFT de 5"~12,1" (Admite RGB & LVDS)


Android Embedded System :WUABAB120V+ 121B series (PCAP) / LVDS Interface
Linux Embedded System: WUABLB120V+ 121B series (PCAP) / LVDS Interface

12.1 PCAP TFT Module (LVDS) with Android Embedded System / Linux Embedded System


Especificaciones placa base integrada

Processor System CPU iMX6 DL - Dual core 1.0GHz (Dual core up to 1GHz per core)
Memory Memory Onboard DDR3L 1GB x64 bit
  Mass storage On-board eMMC drive, up to 8GB
Video LVDS 24 bit LVDS (1024*600、1280*800)
  RGB 24-bits TTL with DE+ H/V sync (800*480)
  HDMI V1.4 (1920*1080)
Graphic Graphic engine Dedicated 2D Hardware accelerator
    Dedicated 3D Hardware accelerator (Supports OpenGL ES2.0 3D)
  H/W Video codec Support MPEG 1/2/4, H.264 Hardware Decoder.
  Display Support 2 types independent display with iMX6DL and i.MX6D/Q
Network Ethernet 1 GbE + IEEE1588 with RJ45 slot
  WIFI/BT BLE 4.0 (internal USB for option WIFI Module, Optional Parts)
USB USB 2 Standard USB 2.0 type A ; 1 x USB 2.0 OTG
    2*USB2.0 with pin header
Audio Audio WM8903 Audio codec with 3.5 mm stereo jack
    Mic in, Line out internal pin header
I/O Serial port 4 x RS232 (3 x ePH connector, 1x ePHD for console,) ; 
    1 x RS485 (1 x ePH connector)
  IIC 1 (Client, for PCAP use)
  GPIO 32-pin 3.3V TTL Level GPIOs / 2-pin TTL PWM output
Touch Panel Resistive 4-wire Resistive type (onboard)
  Capacitive CTP is driven IIC interface
Clock RTC RTC Circuitry for low power consumption with Battery on-board
Expansion SD Socket 1 *μSD Slot (support up to SDXC)
Power Voltage DC9V ~ DC24V±10%
  Consumption 2.5W
Environment Temperature -20℃ ~ 70℃ (Operating)
    -30℃ ~ 80℃ (Storage)
Operating System   Android 4.4.2 or Linux Yocto Daisy 1.6
Dimension   130mm * 95mm * 20mm
Certification   CE/FCC



Architecture - Dimension

Block Diagram

The diagram shows the connection of IC components and devices.

2.2	Block Diagram

Position of Connector and Pin header

Position on Connector and Pin Header
Connector No. Description Connector No. Description
J2(J8) DC Power Jack J15 RS485 port
J5 Micro SD Card Slot J11 Audio input interface
J6 USB port in Type A connector J12 Audio output interface
J7 Ethernet in RJ45 Slot J19 RTP interface
J22 GPIO port1 J4 3.5mm Earphone+ Micro phone
J24 GPIO port2 J1 USB OTG interface
J9, J20 USB port in pin header J25 I2C interface for CTP(PCAP)
J16, J18,J26 RS232 port J14 RGB LCD interfaces
J23 RS232 for Console J3 HDMI (1920*1080)
J10 LVDS LCD interfaces    
SW2 Display selection switch    

Especificaciones TFT

Especificaciones generales

Elemento Dimensión Unidad
Diagonal 12.1 pulgada
Resolución 1280 × RGB × 800(TFT) puntos
Dimensión del módulo 278.0(W) ×184.0(H) × 13.0(D) mm
Zona activa 261.12 (H) × 163.2(V) mm
Distancia entre puntos 0.204(W) × 0.204(H) mm
Tipo de LCD TFT, Negro, Transmisivo
Dirección de la vista 12 o'clock
Dirección de inversión de escala de grises 6 o'clock
Relación de aspecto 16:9
Tipo de retroiluminación LED, Blanco
Pantalla táctil Con panel táctil capacitivo (PCAP) 
Interfaz LVDS
Superficie Deslumbramiento

Valores nominales máximos absolutos

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Temperatura de funcionamiento TOP -20 +70
Temperatura de almacenamiento TST -20 +80
go top