Home Productos Pantalla LCD COG WO12864T1

128x64 COG LCD Electronica (ST7567S)

Modelo Nº WO12864T1

►Pantalla Para LCD COG
►Pantalla Gráfica
►128x64 puntos
►IC: ST7565S
►Fuente de alimentación de 3V
►1/65 duty cycle, 1/9 bias
►Interfaz : 6800/8080/SPI

DIBUJO

128x64 Chip on Glass LCD (ST7567S) - WO12864T1


Data source ref:WO12864T1-TFH#

ESPECIFICACIONES

Función interfaz Pin

Pin No. Símbolo Descripción
1 VDD Power supply pin for logic.
2 VSS Ground pin, connected to 0V
3 CSB Chip select input pin.
4 NC NC
5 RSTB Hardware reset input pin
6 A0 It determines whether the access is related to data or
command.
7 RWR
C86 MPU Type RWR Description
H 6800 series R/W Read/Write control input pin.
R/W="H":read
R/W="L":write.
L 8080 series /WR Write enable input pin.
Signals on D[7:0] will be latched at the rising edge of /WR signal.
8 ERD
C86 MPU Type ERD Description
H 6800 series E Read/Write control input pin.
R/W="H": When E is "H", D[7:0] are in output mode.
R/W="L": Signals on D[7:0] are latched at the falling edge of E signal
L 8080 series /RD Read enable input pin.
When /RD is "L", D[7:0] are in output mode.
9~16 D0~D7 8-bit bi-directional data bus. Connect to the data bus of 8-bit
microprocessor. When CSB is non-active (CSB=“H”), D[7:0]
pins are high impedance.
17 C86 C86 selects the microprocessor type in parallel interface mode
18 PSB Interface selection

Especificaciones generales

Elemento Dimensión Unidad
Matriz de puntos (Resolución) 128 × 64
Dimensión del módulo 38.0 × 26.42 × 8.8 mm
Área de visión 29.58 × 16.22 mm
zona activa 25.58 × 14.06 mm
Tamaño del punto 0.18 × 0.20 mm
Distancia entre puntos 0.20 × 0.22 mm
Deber 1/65 DUTY,1/9 BIAS
Dirección de la vista 6 o’clock
Tipo de retroiluminación LED
IC ST7567S
Interfaz 6800/8080/4-Line SPI

Valores nominales máximos absolutos

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Temperatura de funcionamiento TOP -20 +70
Temperatura de almacenamiento TST -30 +80
Input Voltage VI -0.3 VDD+0.3 V
Digital Power Supply Voltage VDD-Vss -0.3 4.0 V
LCD Power supply voltage V0-XV0 -0.3 14.0 V

Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage For Logic VDD-VSS 2.7 3.0 3.3 V
Supply Voltage For LCD VOP Ta=-20℃
Ta=25℃
Ta=70℃

8.9

9.1

9.3
V
V
V
Input High Volt. VIH 0.7VDD VDD V
Input Low Volt. VIL VSS 0.3VDD V
Output High Volt. VOH 0.8VDD VDD V
Output Low Volt. VOL VDD 0.2VDD V
Supply Current IDD VDD=3.0V 1.5 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close