Home Productos Pantalla LCD COG WO12864T
128x64 COG LCD Electronica (ST7565P) - WO12864T
128x64 COG LCD Electronica (ST7565P) - WO12864T
128x64 COG LCD Electronica (ST7565P) - WO12864T
128x64 COG LCD Electronica (ST7565P) - WO12864T

128x64 COG LCD Electronica (ST7565P)

Modelo Nº WO12864T

►Pantalla Para LCD COG
►Pantalla Gráfica
►128x64 puntos
►IC: ST7565P
►Fuente de alimentación de 3,3V
►1/65 duty cycle, 1/9 bias
►Interfaz : 6800/8080/SPI

PREV. VOLVER A LA LISTA SIGUIENTE

Descripción

DIBUJO

128x64 Chip on Glass LCD (ST7565P) - WO12864T

ESPECIFICACIONES

Función interfaz Pin

Pin No. Símbolo I/O Descripción
1 VDD _ Power supply pin for logic.
2 VSS _ Ground pin, connected to 0V
3 /CS1 I Chip select input pin. Interface access is enabled when CS1B is "L" and CB2 is "H". When chip is on-active (CS1B="H" or CS2="L"), D[7:0] pins are high impedance.
4 CS2
5 /RES I Hardware reset input pin. When RSTB is "L", internal initialization is executed and the internal registers will be initialized.
6 A0 I It determines whether the access is related to data or command.
A0="H": Indicates that signals on D[7:0] are display data.
A0="L": Indicates that signals on D[7:0] are command.
7 R/W I Read/Write execution control pin. When PSB is "H",
RWR is not used in serial interface and should fix to "H" by VDD.
C86 MPU Type RWR Descripción
H 6800 series R/W Read/Write control input pin.
R/W="H":read
R/W="L":write.
L 8080 series /WR Write enable input pin.
Signals on D[7:0] will be latched at the rising edge of /WR signal.
 
8 E I Read/Write execution control pin. When PSB is "H",
C86 MPU Type ERD Descripción
H 6800 series E Read/Write control input pin.
R/W="H": When E is "H", D[7:0] are in output mode.
R/W="L": Signals on D[7:0] are latched at the falling edge of E signal
L 8080 series /RD Read enable input pin.
When /RD is "L", D[7:0] are in output mode.

ERD is not used in serial interface and should fix to "H" by VDD.
9-16 D0-D7 I/O Data bus line
17 C86 I C86 selects the microprocessor type in parallel interface mode.
PSB C86 Selected Interface
"H" "H" Parallel 6800 Series MPU Interface
"H" "L" Parallel 8080 Series MPU Interface
"L" "X" Serial 4-Line SPI Interface

Please refer to "APPLICATION NOTES" and "Microprocessor Interface" (Section 6) for detailed connection of the selected interface.
18 P/S I PSB selects the interface type: Serial or Parallel.

Especificaciones generales

Elemento Dimensión Unidad
Matriz de puntos (Resolución) 128 × 64 －
Dimensión del módulo 38.0 × 26.42 × 8.8 mm
Área de visión 29.58 × 16.22 mm
zona activa 25.58 × 14.06 mm
Tamaño del punto 0.18 × 0.20 mm
Distancia entre puntos 0.20 × 0.22 mm
Deber 1/65 DUTY,1/9 BIAS
Tipo de retroiluminación LED
IC ST7565P

Valores nominales máximos absolutos

Elemento Símbolo Valor mín. Valor típico Valor máx. Unidad
Temperatura de funcionamiento TOP -20 － +70 ℃
Temperatura de almacenamiento TST -30 － +80 ℃
Power Supply Voltage VDD -0.3 － 3.6 V
Power supply voltage (VDD standard) V0, VOUT -0.3 － 14.5 V
Power supply voltage (VDD standard) V1, V2, V3, V4 -0.3 － V0+0.3 V

Características electrónicas

Elemento Símbolo Condición Valor mín. Valor típico Valor máx. Unidad
Supply Voltage For Logic VDD-VSS － 3.0 － 3.3 V
Supply Voltage For LCD VOP Ta=-20℃
Ta=25℃
Ta=70℃		 －
8.9
－		 －
9.1
－		 －
9.3
－		 V
V
V
Input High Volt. VIH － 0.8 VDD － VDD V
Input Low Volt. VIL － Vss － 0.2 VDD V
Output High Volt. VOH － 0.8 VDD － VDD V
Output Low Volt. VOL － Vss － 0.2 VDD V
Supply Current IDD VDD=3.3V － － 2.0 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close