Startseite Produkte TFT-LCDs TFT IPS Bildschirm WF101JTYAHLNN0

10.1 Zoll 1024x600 LVDS IPS Farbdisplay

Modellnummer WF101JTYAHLNN0

►10,1 zoll display
►Auflösung: 1024×600 Punkten
►Betrachtungsrichtung: IPS
►Schnittstelle: LVDS
►Treiber IC : EK79001HN + EK73215BCGA
►Steuerplatine: Nein
►Helligkeit(cd/m2) : 500
►Durchsteckrahmen: Nein
►Touchscreen: ohne Touchscreen

Zeichnung

10.1 inch 1024x600 LVDS IPS TFT Display - WF101JTYAHLNN0

Technische Daten

Schnittstelle

Pin No. Symbol Funktion
1 VCOM Common voltage
2 VDD Digital power
3 VDD Digital power
4 NC Not connect
5 Reset Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF)
6 STBYB Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7 GND Digital ground
8 RXIN0- Negative LVDS differential data inputs
9 RXIN0+ Positive LVDS differential data inputs
10 GND Digital ground
11 RXIN1- Negative LVDS differential data inputs
12 RXIN1+ Positive LVDS differential data inputs
13 GND Digital ground
14 RXIN2- Negative LVDS differential data inputs
15 RXIN2+ Positive LVDS differential data inputs
16 GND Digital ground
17 RXCLKN- Negative LVDS differential clock inputs
18 RXCLKN+ Positive LVDS differential clock inputs
19 GND Digital ground
20 RXIN3- Negative LVDS differential data inputs
21 RXIN3+ Positive LVDS differential data inputs
22 GND Digital ground
23 NC Not connect
24 NC Not connect
25 GND Digital ground
26 NC Not connect
27 NC Not connect
28 SELB 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit
29 AVDD Analog power
30 GND Digital ground
31 LED- LED Cathode
32 LED- LED Cathode
33 L/R Left or right display control
34 U/D Up / down display control
35 VGL Negative power for TFT
36 NC Not connect
37 NC Not connect
38 VGH Positive power for TFT
39 LED+ LED Anode
40 LED+ LED Anode
When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

Allgemeine Spezifikationen

Artikel Ausmaß Einheit
Größe 10.1 Zoll
Punktmatrix 1024 RGB x 600 Punkte
Abmaße der modul 235(W) x 143(H) x 5.05(D) mm
Aktiver Bereich 222.72 (H) x 125.28(V) mm
Punktabstand 0.2175(W) x 0.2088(H) mm
LCD Typ TFT, schwarz, Transmissiv
Schnittstelle LVDS
Treiber IC EK79001HN + EK73215BCGA oder gleichwertig
Blickwinkel 85/85/85/85
Seitenverhältnis 16:9
Hintergrundbeleuchtung Typ LED, Weiß
Touchscreen ohne Touchscreen
Oberfläche Anti-Reflextion

absolute Grenzwerte

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Betriebstemperatur TOP -20 +70
Lagertemperatur TST -30 +80

elektrische Eigenschaften

Typical Operation Conditions (At Ta = 25 °C,)

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Digital Power Supply Voltage For LCD VDD 3 3.3 3.6 V
Analog Power Supply Voltage AVDD 9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH 19.4 20.0 20.6 V
Gate Off Power Supply Voltage VGL -10.3 -10.0 -9.7 V
Common Power Supply Voltage VCOM 4.0 4.3 4.6 V
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD V
go top
close