7 zoll TFT-Display mit Controller-board
Modellnummer WF70QTZFGDBN0
►Größe: 7 Zoll
►Auflösung: 800x480 Punkten
►Betrachtungsrichtung: 12H
►Schnittstelle: MPU
►Integrierter Controller: SSD1963
►Steuerplatine: Ja
►Helligkeit (cd/m²): 360
►Touchscreen: ohne Touchscreen
►O-Film: Ja
Beschreibung
Das WF70QTZFGDBN0 ist ein 7-Zoll-TFT-Display der Q-Serie, die mit der SSD1963-Controller-Platine und einen 36-Pin-Anschluss ausgestattet ist. Das Modul kann mit 8-Bit oder 16-Bit von einem 8080-MPU betrieben werden. Die Pins Nr. 33 - 36 sind bereits als Versorgung für die Hintergrundbeleuchtung festgelegt. Das Modul hat eine Abmessung von 165 x 100 mm und eine AA-Größe von 154,08 x 85,92 mm.
Zeichnung

Technische Daten
Schnittstelle
Pin | Symbol | Funktion | Pin | Symbol | Funktion |
---|---|---|---|---|---|
1 | GND | System ground pin of the IC . Connect to system ground. |
23-24 | NC | No connect |
2 | VDD | Power Supply : +3.3V | 25 | CS | Chip select |
3 | BLE | Backlight control signal , H: On \ L: Off | 26 | RST | Hardware reset |
4 | D/C | Data/Command select | 27 | L/R | Left / right selection; Default L/R=H |
5 | WR | Write strobe signal | 28 | U/D | Up/down selection; ; Default U/D=L |
6 | RD | Read strobe signal | 29-32 | NC | No connect |
7-14 | DB0~DB7 | Data bus | 33-34 | VLED- | Power for LED Driver IC(GND) |
15-22 | DB8~DB15 | Data bus (When select 8bits Mode, this pin is NC) |
35-36 | VLED+ | Power for LED Driver IC(+5V) |
Allgemeine Spezifikationen
Artikel | Ausmaß | Einheit |
---|---|---|
Größe | 7,0 | Zoll |
Punktmatrix | 800 x RGB x 480(TFT) | Punkte |
Abmaße der modul | 165,0(W) x 100,0(H) x 12,2(D) | mm |
Aktiver Bereich | 154,08 x 85,92 | mm |
Punktabstand | 0,0642 x 0,179 | mm |
LCD Typ | TFT, Weiß, Transmissiv | |
Betrachtungsrichtung | 12 o'clock | |
Grauskala-Umkehrrichtung | 6 o'clock | |
Hintergrundbeleuchtung Typ | LED, Weiß | |
Controller IC | SSD1963 | |
Schnittstelle | Digital 8080 family MPU 8bit/16bit | |
Touchscreen | ohne Touchscreen | |
Oberfläche | Anti-Reflextion |
absolute Grenzwerte
Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Betriebstemperatur | TOP | -20 | - | +70 | ℃ |
Lagertemperatur | TST | -30 | - | +80 | ℃ |
elektrische Eigenschaften
Operating conditions: (CON2.Pin1=GND, Pin2=VDD)
Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | — | 3,0 | 3,1 | 3,3 | V |
Supply Current For LCM | IDD | — | — | 300 | 450 | mA |
Backlight driving conditions (CON2.Pin33,34=VLED-, Pin35,36=VLED+)
Parameter | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Operation Current For LED Driver | VLED=5V | 400 | - | 600 | mA |
Power Consumption | VLED=5V | 2000 | - | 3000 | mW |
Supply Voltage For LED Driver | VLED+ | - | 5 | - | V |
LED Life Time | - | 20,000 | - | - | Hr |