Startseite Produkte OLED-Anzeige Grafik-OLED-Anzeigen WEO012864J-CTP

12864, 2,42 Zoll OLED-Anzeige mit kapazitiven Touchscreen

Modellnummer WEO012864J-CTP

►Typ: Grafik
►Bauweise: COG
►Größe: 2,42 Zoll
►128 x 64 Punktmatrix
►Integrierter Controller SSD1309
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: 6800, optional 8080, SPI
►kapazitiven Touchscreen
►die Farbe des Displays: Weiß / Gelb / Himmelblau / Grün

Zeichnung

12864, 2.42 inch OLED Display Module with Capacitive Touch Panel - WEO012864J-CTP

Data source ref: WEO012864JWPP3D00000

Technische Daten

Schnittstelle Pin-Funktion

No. Symbol Funktion
1 VDD Power supply pin for core logic operation
2 VSS Ground.
3 NC(GND) No connection
4~11 D0~D7 These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW.
12 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
13 NC(GND) No connection
14 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
15 R/W# This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
16 D/C# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
17 E This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
18 NC(GND) No connection
19 DISP No Connection
20 NC(GND) No connection
21 TP_INT Interrupt signal, active low, asserted to request
Host start a new transaction
22 TP_SDA I2C data signal
23 TP_SCL I2C clock signal
24 TP_RST External reset signal, active low

mechanische Daten

Artikel Dimension Einheit
Punktmatrix 128 x 64
Abmaße der modul 75,0 × 52,7 ×10,2 MAX mm
Aktiver Bereich 55,01 × 27,49 mm
Pixelgröße 0,40 × 0,40 mm
Pixelabstand 0,43 × 0,43 mm
der Anzeigemodus Passive Matrix
die Farbe des Displays Monochrome
Drive Duty 1/64 Duty
IC SSD1309
Schnittstelle 8Bits 6800 , Optional 8080 / 4-SPI / I2C
Größe 2,42 Zoll
PCAP IC GT911
Detect Point 1
PCAP Schnittstelle I2C
Oberfläche Glanz

absolute Grenzwerte

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Logic VDD -0,3 4 V
Betriebstemperatur TOP -20 +70 °C
Lagertemperatur TSTG -30 +80 °C

elektronische Eingenschaften

DC elektronische Eingenschaften

Artikel Symbol Condition Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic VDD 2,8 3,0 3,3 V
High Level Input VIH 0,8×VDD V
Low Level Input VIL 0,2×VDD V
High Level Output VOH 0,9×VDD V
Low Level Output VOL 0,1×VDD V
50% Check Board operating Current IDD VDD =3V - 150 300 mA
go top
close