Startseite Produkte OLED-Anzeige Grafik-OLED-Anzeigen WEA009664B

96x64, 1.1 zoll PMOLED-Display

Modellnummer WEA009664B

►1,1 Zoll OLED
►Typ: Grafik
►Bauweise: COG+PCB
►96×64 Punktmatrix
►Integrierter Controller SSD1327
►3-V-Stromversorgung
►1/64 duty
►Schnittstelle: SPI, I2C
►die Farbe des Displays: Gelb

Zeichnung

96x64 OLED Display,1.1 OLED - WEA009664B - Winstar Display

Technische Daten

Schnittstelle Pin-Funktion

No. Symbol Funktion
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

mechanische Daten

Artikel Ausmaß Einheit
Punktmatrix 96 × 64 Punkte
Abmaße der modul 31,5 × 31,5 × 2,72 mm
Aktiver Bereich 22,53 × 15,01 mm
Pixelgröße 0,205 × 0,205 mm
Pixelabstand 0,235 × 0,235 mm
der Anzeigemodus Passive Matrix
die Farbe des Displays Monochrome
Gray scale 4 bits
Drive Duty 1/64 Duty
IC SSD1327
Schnittstelle SPI , Optionale I2C
Größe 1,1 Zoll

elektronische Eingenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic VDD 2,8 3,0 3,2 V
Supply Voltage for Logic VIN 4,8 5,0 5,2 V
Supply Voltage for Display VCC 7,5 8,0 8,5 V
Input High Volt. VIH 0,8×VDD VDDIO V
Input Low Volt. VIL 0 0,2×VDD V
Output High Volt. VOH 0,9×VDD VDDIO V
Output Low Volt. VOL 0 0,1×VDD V
50% Check Board operating Current IDD VDD=3,0V 55 100 mA

absolute Grenzwerte

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Logic VDD 1,65 3,30 V
Supply Voltage for Logic VIN 4,0 6,0 V
Supply Voltage for Display VCC 0 16,0 V
Betriebstemperatur TOP -40 80 °C
Lagertemperatur TSTG -40 85 °C
go top
close