Startseite Produkte COG LCD WO12864N

128x64 ST7567 COG LCDs

Modellnummer WO12864N

►128x64 COG LCD
►LCD Grafik
►IC: ST7567
►3-V-Stromversorgung
►1/65 duty cycle
►Schnittstelle : 6800/8080/SPI

Zeichnung

128x64 ST7567 Chip on Glass LCD Module - WO12864N

Technische Daten

Schnittstelle Pin-Funktion

Pin Symbol Beschreibung
1 CSB Chip select input pin.Interface access is enabled when CSB is “L”,When CSB is non-active(CSB=”H”),D[7:0] pins are high impedance.
2 RSTB Hardware reset input pin. When RSTB is “L”, interna initialization is executed and the internal registers will be initialized.
3 A0 It determines whether the access is related to data or command. A0=“H” : Indicates that signals on D[7:0] are display data.
A0=“L” : Indicates that signals on D[7:0] are command
4 RWR Read/Write execution control pin. When PSB is “H”,
RWR is not used in serial interface and should fix to “H” by VDD1 or VDDH.
5 ERD Read/Write execution control pin. When PSB is “H”,
ERD is not used in serial interface and should fix to “H” by VDD1 or VDDH.
6 D0 When using 8-bit parallel interface: (6800 or 8080 mode)
8-bit bi-directional data bus. Connect to the data bus of 8-bit microprocessor. When CSB is non-active (CSB=“H”), D[7:0] pins are high impedance.
7 D1
8 D2
9 D3
10 D4
11 D5
12 D6
13 D7
14 VDD Power supply
15 Vss Ground
16-19 NC Not connect.
20 V0 V0 is the LCD driving voltage for common circuits at negative frame.
21 XV0 XV0 is the LCD driving voltage for common circuits at positive frame.
22 VG VG is the LCD driving voltage for segment circuits.
23-27 NC Not connect.
28 C86 C86 selects the microprocessor type in parallel interface mode.
29 PSB PSB selects the interface type: Serial or Parallel.
30 NC Not connect.

 

Allgemeine Spezifikationen

Artikel Ausmaß Einheit
Punktmatrix (Auflösung) 128 x 64
Abmaße der modul 89,7 x 49,8 x 6,0 mm
Anzeigebereich 69,0 x 36,5 mm
Aktiver Bereich 63,97 x 31,97 mm
Punktgröße 0,47 x 0,47 mm
Punktabstand 0,5 x 0,5 mm
Duty 1/65 , 1/9 Bias
Backlight-Typ LED
IC ST7567
Schnittstelle 6800/8080/4-Line SPI

Absolute Grenzwerte

Artikel Symbol Mindestwert typischer Wert Maximalwert Einheit
Betriebstemperatur TOP -20 +70
Lagertemperatur TST -30 +80
Input Voltage VI -0,3 VDD+0,3 V
Digital Power Supply Voltage VDD-Vss -0,3 3,6 V
LCD Power supply voltage V0-XV0 -0,3 16 V

 

Elektrische Eigenschaften

Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage For Logic VDD-VSS 2,8 3,0 3,2 V
Supply Voltage For LCD VOP Ta=-20℃
Ta=25℃
Ta=70℃

9,3

9,5

9,7
V
V
V
Input High Volt. VIH 0,7 VDD VDD V
Input Low Volt. VIL Vss 0,3VDD V
Output High Volt. VOH 0,8 VDD VDD V
Output Low Volt. VOL Vss 0,2VDD V
Supply Current IDD VDD=3,0V 0,7 1,0 mA
 

Search Keyword: lcd 128x64, lcd 128 x 64, 128x64 lcd, 128 x 64 lcd

go top
close