Rundes COG LCDs 128x128
Modellnummer WO128128A
►Punktmatrix Display
►COG LCD
►Grafik LCD
►128×128 Punkte
►IC: ST75161
►3,3-V-Stromversorgung
►1/136 duty cycle
►Schnittstelle : 6800/8080/SPI/I2C
Beschreibung
The WO128128A ist ein COG-Monochrom-Grafik-Kreis-LCD-Display-Modul mit einem 128x128-Punkt-Matrix-Format. Dieses kreisförmige LCD-Display-Modul ist mit dem ST75161-IC ausgestattet und unterstützt die Schnittstellen 8080/6800 Parallel, 3-Draht- und 4-Draht-Serial SPI sowie I2C. Die Betrachtungsrichtung ist auf 6 Uhr eingestellt, mit einer 1/136-Ansteuerpflicht und 1/12 BIAS.
Die Logikversorgungsspannung für das WO128128A liegt im Bereich von 2,7V bis 3,3V, mit einem typischen Wert von 3V. Dieses kreisförmige LCD-Display-Modul kann bei Temperaturen von -20°C bis +70°C betrieben werden, und die Lagerungstemperaturen reichen von -30°C bis +80°C.
Das WO128128A ist in zwei Varianten erhältlich: FSTN Negative (WO128128A-TDI) und FSTN Positive LCD-Typ mit weißer LED-Hintergrundbeleuchtung (WO128128A-TFH). USB-Demo-Kits sind derzeit verfügbar, und interessierte Parteien werden ermutigt, uns für USB-Muster oder ein Angebot zu kontaktieren.
Demo kit P/N: WWSTNUSBDEMO-00 for WO128128A-TFH LCD module
Demo kit P/N: WWSTNUSBDEMO-01 for WO128128A-TDI LCD module
Zeichnung
Data source ref: WO128128A-TFH#Technische Daten
Schnittstelle Pin-Funktion
Pin No. | Symbol | Beschreibung |
---|---|---|
1 | VG | VG is the power of SEG-drivers. |
2 | V0 | Positive operating voltage of COM-drivers. |
3 | XV0 | Negative operating voltage of COM-drivers. |
4 | CA1P | DC/DC voltage converter |
5 | CA1N | |
6 | VDD | Power supply |
7 | VSS | Ground |
8 | COMSCN | Set scan direction of COM. |
9 | IF2 | These pins select interface operation mode. |
10 | IF1 | |
11 | IF0 | |
12 | CSB | Chip select input pin. |
13 | A0 | It determines whether the access is related to data or command. |
14 | ERD | Read / Write execution control pin. |
15 | RWR | Read / Write execution control pin. |
16 | RSTB | Hardware reset input pin |
17-24 | D0-D7 | When using 8-bit parallel interface: 8080 or 6800 mode:8 bit bi-directional data bus When using serial interface : 4-line SPI or 3-line SPI mode D[7:4] : fix to “H” by VDD1. D[3:1] : serial input/output data (SDA). D[0] : serial input clock (SCL). D1 to D3 must be connected together (SDA) When using serial interface : I2C interface D[7] : SA[1], I2C slave address bit. Must be connected to VDD1 or VSS1. D[6] : SA[0], I2C slave address bit. Must be connected to VDD1 or VSS1. D[5:4] : fix to “H” by VDD1. D[3:2] : SDA_OUT, serial data and acknowledge output for the I2C interface. D[1] : SDA_IN, serial input data D[0] : SCL, serial input clock . D1 to D3 must be connected together (SDA) CSB must be fixed to “L” by VSS1. |
25 | A | Anode input for LED backlight. |
26 | K | Cathode input for LED backlight |
Allgemeine Spezifikationen
Artikel | Ausmaß | Einheit |
---|---|---|
Punktmatrix (Auflösung) | 128 x 128 | - |
Abmaße der modul | 55,0 x 57,0 x 6,18 | mm |
Anzeigebereich | 42,0 x 42,0 | mm |
Aktiver Bereich | 44,0 x 44,0 | mm |
Punktgröße | 0,328 x 0,328 | mm |
Punktabstand | 0,310 x 0,310 | mm |
Duty | 1/136 DUTY,1/12 BIAS | |
Backlight-Typ | LED | |
IC | ST75161 | |
Schnittstelle | 68/80/4-Line SPI/I2C/9-bit 3-line serial interface |
Absolute Grenzwerte
Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|
Betriebstemperatur | TOP | -20 | - | +70 | ℃ |
Lagertemperatur | TST | -30 | - | +80 | ℃ |
Power Supply Voltage | VDD | -0,3 | - | 4.0 | V |
LCD Power supply voltage | VLCD | -0,3 | - | 20 | V |
LCD Power supply voltage | V0-XV0 | -0,3 | - | 19 | V |
Input voltage | VIN | -0,3 | VDD+0,3 | V |
Elektrische Eigenschaften
Artikel | Symbol | Bedingung | Mindestwert | typischer Wert | Maximalwert | Einheit |
---|---|---|---|---|---|---|
Supply Voltage For Logic | VDD-VSS | - | 2,7 | 3,0 | 3,3 | V |
Supply Voltage For LCD | VOP | Ta=-20℃ Ta=25℃ Ta=70℃ |
- 13,7 - |
- 14,0 - |
- 14,3 - |
V V V |
Input High Volt. | VIH | - | 0,7 VDD | - | VDD | V |
Input Low Volt. | VIL | - | Vss | - | 0,3 VDD | V |
Output High Volt. | VOH | - | 0,8 VDD | - | VDD | V |
Output Low Volt. | VOL | - | Vss | - | 0,2 VDD | V |
Supply Current | IDD | VDD=3,0V | - | - | 2,0 | mA |
Search Keyword: lcd display 128x128, lcd 128x128, 128x128 lcd display