نزل المنتجات TFT LCD IPS TFT WF101JSYAHLNB0

رقم الموديل WF101JSYAHLNB0

◄الحجم: 10.1 بوصة
◄دقة العرض: 1024×600 نقطة
◄إتجاه العرض: IPS
◄الواجهة:LVDS
◄الدائرة المتكاملة لبرنامج التشغيل : EK79001HN + EK73215BCGA
◄لوحة التحكم: الرقم
◄السطوع (شمعة/م 2): 900
◄إطار خلال ثقب: الرقم
◄شاشة اللمس: PCAP بلوحة (شاشة) لمس سعويه
◄Detect Point : 5 Fingers

الرسم

LVDS TFT IPS 10.1, 10.1 inch IPS Display 1024x600 with PCAP - WF101JSYAHLNB0

المواصفات

وظيفة دبوس واجهة التوصيل

Pin No. الرمز الوظيفة
1 VCOM Common voltage
2 VDD Digital power
3 VDD Digital power
4 NC Not connect
5 Reset Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF)
6 STBYB Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7 GND Digital ground
8 RXIN0- Negative LVDS differential data inputs
9 RXIN0+ Positive LVDS differential data inputs
10 GND Digital ground
11 RXIN1- Negative LVDS differential data inputs
12 RXIN1+ Positive LVDS differential data inputs
13 GND Digital ground
14 RXIN2- Negative LVDS differential data inputs
15 RXIN2+ Positive LVDS differential data inputs
16 GND Digital ground
17 RXCLKN- Negative LVDS differential clock inputs
18 RXCLKN+ Positive LVDS differential clock inputs
19 GND Digital ground
20 RXIN3- Negative LVDS differential data inputs
21 RXIN3+ Positive LVDS differential data inputs
22 GND Digital ground
23 NC Not connect
24 NC Not connect
25 GND Digital ground
26 NC Not connect
27 NC Not connect
28 SELB 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit
29 AVDD Analog power
30 GND Digital ground
31 LED- LED Cathode
32 LED- LED Cathode
33 L/R Left or right display control
34 U/D Up / down display control
35 VGL Negative power for TFT
36 NC Not connect
37 NC Not connect
38 VGH Positive power for TFT
39 LED+ LED Anode
40 LED+ LED Anode
When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

PCAP PIN Definition

Pin الرمز الوظيفة
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

المواصفات العامة

العنصر الأبعاد الوحدة
الحجم 10.1 بوصة
مصفوفة نقطية 1024 RGB × 600 نقطة
أبعاد الوحدة 235(W) × 143(H) × 8.78(D) mm
المنطقة النشطة 222.72 (H) × 125.28(V) mm
درجة النقطة 0.2175(W) × 0.2088(H) mm
نوع شاشة LCD TFT, أسود, ناقل
الواجهة LVDS
الدائرة المتكاملة لبرنامج التشغيل EK79001HN + EK73215BCGA أو ما يعادلها
إتجاه العرض 85/85/85/85
نسبة العرض إلى الارتفاع 16:9
نوع الضوء الخلفي LED, أبيض
PCAP IC ILI2511 أو ما يعادلها
PCAP الواجهة USB (I2C available)
PCAP FW Version V6.0.0.0.62.90.1.2
شاشة اللمس PCAP
السطح توهج

تصنيفات الحد الأقصى المطلق

العنصر الرمز أدنى قيمة القيمة النموذجية أقصى قيمة الوحدة
درجة حرارة التشغيل TOP -20 +70
درجة حرارة التخزين TST -30 +80

لمميزات الإلكترونية

Typical Operation Conditions (At Ta = 25 °C,)

العنصر الرمز أدنى قيمة القيمة النموذجية أقصى قيمة الوحدة
Digital Power Supply Voltage For LCD VDD 3 3.3 3.6 V
Analog Power Supply Voltage AVDD 9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH 19.4 20.0 20.6 V
Gate Off Power Supply Voltage VGL -10.3 -10.0 -9.7 V
Common Power Supply Voltage VCOM 4.0 4.3 4.6 V
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD V
Supply PCAP USB_VDD 5V 4.4 5.0 5.5 V
I VDD 5V 97.8 120 mA
go top
close