Home Products TFT LCD High Brightness TFT Display WF101JSYAHMNN0

10.1" 1024x600 High Brightness MIPI IPS TFT Display

Model No. WF101JSYAHMNN0

►Size : 10.1 inch
►Resolution : 1024×600 dots
►View Direction : IPS
►Interface : 4-Lanes MIPI
►Driver IC : EK79007AD3 + EK73217BCGA
►Control-Board : No
►Brightness(cd/m2) : 1100
►Frame Through Hole : No
►Touch Screen : No

Description

WF101JSYAHMNN0 is a 10.1-inch TFT LCD with IPS wide viewing angles. It has 1024×600 dots resolution and 1100 cd/m2 high brightness. The module is built-in with EK79007AD3 + EK73217BCGA driver IC, supporting 4-Lanes MIPI interfaces.

The module's Digital Power Supply Voltage For LCD (VDD) is from 1.71V to 1.89V, with a typical value of 1.8V. It features a glare surface and a 16:9 aspect ratio. This TFT can operate at temperatures from -20 ℃ to +70 ℃, and its storage temperatures are from -30 ℃ to +80 ℃.

DRAWING

10.1 inch 1024x600 High Brightness MIPI IPS TFT Display - WF101JSYAHMNN0

SPECIFICATIONS

Interface

TFT LCD Module

Pin No. Symbol Description
1 VLED+ LED Anode
2 VLED+ LED Anode
3 VGH Positive power for TFT
4 VGL Negative power for TFT
5 UPDN Gate up or down scan control.
UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default)
UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6 SHLR Source right or left sequence control.
SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data.
SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
7 VLED- LED Cathode
8 VLED- LED Cathode
9 AVDD Analog power
10 GND Digital ground
11 D3P MIPI data input.
12 D3N MIPI data input.
13 GND Digital ground
14 D2P MIPI data input.
15 D2N MIPI data input.
16 GND Digital ground
17 CLKP MIPI clock input
18 CLKN MIPI clock input
19 GND Digital ground
20 D1P MIPI data input.
21 D1N MIPI data input.
22 GND Digital ground
23 D0P MIPI data input.
24 D0N MIPI data input.
25 GND Digital ground
26 STBYB Standby mode.
STBYB = ”H“,normal operation(default)
STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27 RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28 VDD (1.8V) Digital power
29 VDD (1.8V) Digital power
30 VCOMI Common voltage

General Specifications

Item Dimension Unit
Size 10.1 inch
Dot Matrix 1024 RGB x 600 dots
Module dimension 235(W) x 143(H) x 5.05(D) mm
Active area 222.72 (H) x 125.28(V) mm
Dot pitch 0.2175(W) x 0.2088(H) mm
LCD type TFT, Normally Black, Transmissive
Interface 4-Lanes MIPI
Driver IC EK79007AD3 + EK73217BCGA or equivalent
Viewing Angle 85/85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
Touch Panel Without Touch Panel
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Typical Operation Conditions (At Ta = 25 °C,)

Item Symbol Min Typ Max Unit
Digital Power Supply Voltage For LCD VDD  1.71 1.8 1.89 V
Analog Power Supply Voltage AVDD  9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH  19.4 20 20.6 V
Gate Off Power Supply Voltage VGL  -10.3 -10 -9.7 V
Common Power Supply Voltage VCOMI 4 4.3 4.6 V

Search keyword: tft 10.1", 10.1 tft lcd, 10.1" tft lcd, 10.1 inch tft lcd, tft lcd 10.1, 10.1 tft display, 10.1" tft display, 10.1 inch tft display, tft display 10.1", 10.1 tft lcd
go top
close