Home Products Graphic LCD WG240128E

240x128 Graphic LCD Displays

Model No. WG240128E

►Graphic Display LCD 240x128
►IC: RA6963
►1/128 duty cycle
►Built-in negative voltage
►+5V power supply
►WG240128EP1: 20 PINS, PIN19 and PIN20 for backlight
►Interface: 8080
►Touch Screen: Option

Description

WG240128E is a graphic LCD 240x128 module which is having the module dimension 144x104 mm and AA size of 107.98x57.58 mm, diagonal size 4.8 inch. This 240128 display LCD modules is built in with RA6963 controller and negative voltage output built in on module.  It supports 8080 8-bit parallel interface and 5V power supply nd 3.3V optional, this module is temperature compensation optional, and touch panel optional as well. Please note the standard WG240128E is 18 pins on board, if you need 20-pins; please choose WG240128EP1 type. 

DRAWING

240x128 Graphic LCD Displays - WG240128E-01
240x128 Graphic LCD Displays - WG240128E-02
Data source ref: WG240128E-TFH-VZ#

SPECIFICATIONS

Interface Pin Function

Pin No. Symbol Level Function
1 Vee - Negative Voltage Output
2 Vss - GND
3 Vdd - Power supply
4 Vo - Power supply for LCD driver
5 /WR L Data write. Write data into RA6963when WR = L
6 /RD L Data read. Read data from RA6963when RD = L
7 /CE L L : Chip enable
8 C/D H / L WR=L , C/D=H : Command Write  C/D=L: Data write
RD=L , C/D=H : Status Read  C/D=L: Data read
9 RST - Display Data signal
10 DB0 H / L Data bus line
11 DB1 H / L Data bus line
12 DB2 H / L Data bus line
13 DB3 H / L Data bus line
14 DB4 H / L Data bus line
15 DB5 H / L Data bus line
16 DB6 H / L Data bus line
17 DB7 H / L Data bus line
18 FS - Pins for selection of font; H : 6 * 8 , L : 8 * 8
19 NC - No connection
20 NC - No connection

General Specification

Item Dimension Unit
Number of dots 240 x 128
Module dimension 144.0 x 104.0 x 14.3(MAX) mm
View area 114.0 x 64.0 mm
Active area 107.98 x 57.58 mm
Dot size 0.43 x 0.43 mm
Dot pitch 0.45 x 0.45 mm
Duty 1/128
Backlight Type LED
IC RA6963
Interface 80 series

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 - +70
Storage Temperature TST -30 - +80
Input voltage VIN -0.3 - VDD+0.3 V
Supply Voltage For Logic VDD-VSS -0.3 - +7.0 V

Electrical Characteristics

Item Symbol Condition Min. Typ. Max. Unit
Supply Voltage For Logic VDD-VSS - 4.5 5.0 5.5 V
Supply Voltage For LCD VOP

Ta=-20℃
Ta=25℃
Ta=70℃


18.9
17.6

19.5
21.7
20.1
V
V
V
Input High Volt. VIH - 0.8VDD - VDD V
Input Low Volt. VIL - 0 - 0.15 VDD V
Output High Volt. VOH - VDD-0.3 - VDD V
Output Low Volt. VOL - 0 - 0.3 V
Supply Current IDD - 45 55 60 mA

Related Products

go top
close