3.5" PCAP Touchscreen TFT with LCD Controller Board
Model No. WF35QTIBCDBG0
►Touchscreen TFT 3.5"
►Resolution : 320 x 240 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : Yes
►Brightness(cd/m²) : 340
►Frame Through Hole : Yes
►Touch Screen : Projected capacitive touchscreen (PCAP)
►Detect Point : 5 Fingers
Description
The Touchscreen TFT LCD model WF35QTIBCDBG0 is our 3.5 inch WF35L extended model TFT LCD display with SSD1963 controller board plus a 36 pin-out connector. This model is with Projected capacitive touch screen (PCAP), it's available in 8 bit or 16 bit option and already defined pin no. 33 ~ 36 as backlight supply on this SSD1963 LCD controller board, therefore, there is no need to design extra backlight circuit. The TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:
- Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
- Q Series modules are available in 8 bit and 16 bit parallel interface options.
- The pin no. 33 ~ 36 already pre-defined as backlight supply.
- Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
- The 5.7", 7.0", 8.0"and 10.2" Q Series are allowed to design “Sleep Mode” to close BIAS(VGH, VGL, AVDD) low power consumption mode.
- Capacitive Touchscreen TFT options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.
DRAWING
SPECIFICATIONS
Interface
Pin | Symbol | Function |
---|---|---|
1 | GND | System ground pin of the IC. Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BL_E | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7~14 | DB0~DB7 | Data bus |
15~22 | DB8~DB15 | Data bus (When select 8bits Mode, this pin is NC) |
23 | NC | No connect |
24 | CTP_INT | External interrupt to the host |
25 | CS | Chip select |
26 | RST | Hardware reset (RESET#) |
27~28 | NC | No connect |
29 | CTP_SCL | I2C clock input |
30 | CTP_SDA | I2C data input and output |
31 | CTP_RST | External Reset, Low is active |
32 | NC | No connect |
33~34 | VLED- | VLED- for B/L LED inverter (GND) |
35~36 | VLED+ | VLED+ for B/L LED inverter(+3.3V) |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 3.5 | inch |
Dot Matrix | 320 × RGB × 240(TFT) | dots |
Module dimension | 93.5 × 66.44 × 8.89 | mm |
Active area | 70.08 × 52.56 | mm |
Dot pitch | 0.073 × 0.219 | mm |
LCD type | TFT, Normally White, Transmissive | |
View Direction | 12 o'clock | |
Gray Scale Inversion Direction | 6 o'clock | |
Aspect Ratio | 4:3 | |
Backlight Type | LED, Normally White | |
Controller IC | SSD1963 | |
Interface | Digital 8080 family MPU 8bit/16bit | |
PCAP IC | ILI2130 or equivalent | |
PCAP Interface | I2C | |
PCAP FW Version | 0x07.0x00.0x00.0x00.0x00.0x35.0x5A.0x01 | |
PCAP Resolution | 16384*16384 | |
Touchscreen | Projected capacitive touchscreen (PCAP) | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | - | 3.0 | 3.1 | 3.3 | V |
Supply Current For LCM | IDD | - | - | 210 | 350 | mA |
Search keyword: tft 3.5, tft 3.5", 3.5 tft lcd, 3.5" tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5" tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5"