Home Products TFT LCD TFT Panel + Controller Board WF102PTIFGDBN0

10.2" TFT Module + TFT LCD Controller Board

Model No. WF102PTIFGDBN0

►Display Format : 800 x 480
►Size : 10.2”
►View Direction : 12H
►Interface : MCU
►Built-in Controller : RA8875
►Control-Board : Yes
►Brightness(cd/m2) : 350
►Frame Through Hole : Yes
►Touch Screen : No

DESCRIPTION

The WF102PTIFGDBN0 TFT-LCD is a 10.2" Winstar TFT P series family. The WF102P is the WF102A extended model which is with RA8875 controller board plus a 36 pin-out connector on board. This 10.2" TFT LCD model is featured with 8 bit or 16 bit options and already defined pin no. 33 ~ 36 as backlight supply; therefore, the customers no need to design extra backlight circuit. The key Advantages of TFT P Series are as below:

  • Winstar P Series modules integrated a 36 pin-out connector on RA8875 controller board and all connectors are in the same direction.
  • Winstar TFT P Series are both fit for 8 bit and 16 bit parallel interface options.
  • The pin no. 33 ~ 36 already been defined as backlight supply.
  • TFT P Series modules are built in backlight driver IC.
  • Resistive Touch Screen option is built-in on the RA8875 control board.
  • Capacitive Touch Screen option is available for TFT P Series display.
  • It supports the Chinese character, backlight brightness adjustment, Flash Memory and touch panel driver.

DRAWING

10.2" TFT Module + TFT LCD Controller Board - WF102PTIFGDBN0

SPECIFICATIONS

Interface

Pin Symbol Function
1 GND System ground pin of the IC .
Connect to system ground.
2 VDD Power Supply : +3.3V
3 NC No connect
4 RS Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23 WAIT Wait Signal Output(H:active)
24 NC No connect
25 CS Chip select
26 RST Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; Default U/D=L
29~32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

General Specifications

Item Dimension Unit
Size 10.2 inch
Dot Matrix 800 × RGB × 480 dots
Module dimension 235.0 (H) × 145.8 (V) × 12.1 (D) mm
Active area 222.0(W) × 132.48(H) mm
Dot pitch 0.0925(W) × 0.276(H) mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Controller IC RA8875
Interface Digital 8080 family MPU 8bit/16bit
Touch Screen Without touch screen
Surface Anti-Glare

Absolute Maximum Ratings

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.3 3.6 V
Supply Current For LCM IDD 190 195 mA

Search keyword: tft 10.2, tft 10.2", 10.2 tft lcd, 10.2" tft lcd, 10.2 inch tft lcd, tft lcd 10.1, 10.2 tft display, 10.2" tft display, 10.2 inch tft display, tft display 10.2, tft display 10.2", 10.2 tft lcd
go top
close