June.2016-English         Issue No.91 www.winstar.com.tw
 
Issue No. 91
 
Contents
1. Notification of Winstar Headquarters Relocation
2. Shipping Address for RMA Return Goods to Taiwan
3. Notification of Winstar Taipei Branch Office Relocation
4. Shipping Arrangement before Stock-taking (2016 June)
5. New Website Launch Announcement
6. Winstar Bar TFT Introduction
7. 5.2" Bar TFT WF52A v.s. 5.2" STN WG24064A
8. Product Introduction - 5.2" TFT WF52A (TFT Panel only)
9. Product Introduction - 5.2" TFT WF52Q (with Controller Board)
10. Product Introduction - 3.9" TFT WF39A
11. Product Introduction - 4.6" TFT WF46A
12. Product Introduction - 1.5" OLED WEO128128A

 

 

Notification of Winstar Headquarters Relocation

Dear Valued Customers,
We are pleased to inform you that Winstar Headquarters will be moving to the following new address effective from June 27, 2016. It is located in Central Taiwan Science Park.

Headquarters Address: 5F, No.31, Keya Rd., Daya Dist., Taichung City 428, Taiwan
Tel: +886-4-2568 9987
Fax: +886-4-2568 7763

Due to office relocation, our office will be closed from June 24, (Fri) to June 26, 2016 (Sun). Please update your Winstar contact information of mailing address, telephone number and fax number. Please note all staff extension number and e-mail address are all the same. We will continually provide our qualified service and products to our customers at the highest competent level. We look forward to your continued support. We will strive for providing the excellent service in appreciation of your support. Thank you for your kind attention!

Notification of Winstar Headquarters Relocation

 

TOP

 

 

Shipping Address for RMA Return Goods to Taiwan

Winstar RMA office will be located in another building in Central Taiwan Science Park. For RMA return goods, please contact with Winstar sales persons before shipping to receive a Return Material Authorization (RMA) number. The RMA goods, please send to the below address.

RMA Address: 4F, No.25, Keya Rd., Daya Dist., Taichung City 428, Taiwan
Recipient: please mark: "Winstar RMA Center"
Please mark “RMA” number on carton.

 

TOP

 

Notification of Winstar Taipei Branch Office Relocation

In order to provide better service to our customers in North Taiwan, Winstar Taipei branch office will move to Taipei World Trade Center (TWTC). Below is the new address and Telephone / Fax number of our Taipei Branch. Please note the RMA Goods still have to send to our RMA Center in Taichung City.

Taipei Branch Address: 6F.-6C15, No.5, Sec. 5, Xinyi Rd., Xinyi Dist., Taipei City 110, Taiwan
Tel: +886-2-2723-8289
Fax: +886-2-2720-1496

 

 

TOP

 

Shipping Arrangement before Stock-taking (2016 June)

After Winstar Headquarters relocation, Winstar Display will have half yearly stock-taking in late of June for Taiwan and China plants. Please note that we will stop shipping and receiving shipment during this period. Below are the last shipping date before the inventory check and the first shipping date after the stock-taking for your reference. Please work with your Winstar sales persons closely before the stocktaking if your shipment might be affected. Thank you.

Shipping from Taiwan
►Last shipping date: June 22, 2016
►First shipping date: July 1, 2016
Shipping from China
►Last shipping date: June 22, 2016
►First shipping date: June 28, 2016
Shipping Arrangement before Stock-taking (2016 June)

 

 

TOP

 

New Website Launch Announcement

We are very excited to announce the launch of Winstar newly designed website. Visit us at our new web www.winstar.com.tw. The site’s homepage features bright colors and an uncluttered design and easily accessible for all customers. Our goal is to make this new website faster, easier to navigate, and more user-friendly. One of the most noticeable changes is Winstar new site is a RWD website.

Responsive Web Design (RWD) is an approach of laying-out and coding a website such that the website provides an optimal viewing experience - ease of reading and navigation with a minimum of resizing, and scrolling - across a wide range of devices (from desktop computer monitors to tablet and cell phones). RWD websites are fluid, meaning the content moves freely across all screen resolutions and all devices.

Customers will find our site is divided into 8 main sections: Company, Products, Technology, News & Event, Video, Location, Login and Contact us. We use a client-centric layout so our customers could easily navigate our website and locate the information they need. We encourage you to visit and explore our new website so you can experience the user-friendly function of the site especially the Product Finder function.

  • Product Finder: Customers can find a "Product Finder" ICON on top the website in each webpage and the advanced search column at bottom of each page. It is a user-friendly search function; customers can use any condition to search Winstar products by using “Product Finder”function.
  • Login Service: This is a Customer Zone; we provide SPEC datasheet download service for our main distributors. This service will be effective from July. Please contact with your Winstar sales person for your login ID number and password.

 

Link to www. winstar.com.tw

New Website Launch Announcement

 

 

TOP

 

Winstar Bar TFT Introduction

Currently, the mainstream aspect ratio of the TFT LCD panel in the market is 4:3 or 16:9 aspect ratio. But for some applications, some sort of Bar Type shape of display panel would be better than the current mainstream 4:3 or 16:9. Winstar Display released a series of Bar Type TFT LCD display in a row. In this issue, we will introduce 5.2 inch WF52A (Winstar offer only), 3.9 inch WF39A and 4.6 inch WF46A. These bar type TFT displays are perfect for industrial equipment, automotive application, server system, POS system, dynamic information displays and advertising display. In order to meet with customers requirement especially for industrial applications, we develop more derivative solution from these Bar type TFT, e.g. with screw hole on module, with touch panel, high brightness, with controller board. Welcome to learn more for Winstar Bar TFT in the following content.

 

 

TOP

 

5.2" Bar TFT WF52A v.s. 5.2" STN WG24064A

Winstar monochrome STN WG24064A is a very popular Bar Type display module for industrial applications. We developed our first Bar Type TFT WF52A for customers to upgrade their monochrome display to color TFT. Below is the pin definition comparison for WF52QTLBSDBN0 (with SSD1963 controller board) and WG24064A. They are pin-to-pin from pin 1 to pin 20. WG24064A is using A.K pin for backlight, WF52QTLBSDBN0 is using pin 21 and pin 22 for backlight. Therefore, it’s very easy for customers to upgrade from monochrome STN to color TFT. The WF52QTLBSDBN0 is perfect for industrial equipment & automotive applications, server system, POS system and advertising display.

5.2" Bar TFT WF52A v.s. 5.2" STN WG24064A

 

 

TOP

 

Product Introduction - 5.2" TFT WF52A (TFT Panel only)

Winstar Display released a Bar type 5.2" TFT LCD display, it's a new size and resolution of TFT display. This new 5.2 inch TFT WF52A LCD display offers high quality and colorful image made of resolution 480x128 pixels; it is especially suitable for industrial equipment & automotive applications, server system, POS system and advertising display.

WF52ATLASDNN0 is having View Area dimension of 133.4 x 39.4 mm and Active Area of 127.152 x 33.9072 which is very close to our monochrome Graphic WG24064A; both diagonal sizes are 5.2 inch. WF52ATLASDNN0 is built in with ST7252 or equivalent driver IC, this type is having TFT panel only. It supports RGB 24 bits parallel interface SYNC mode. If customers need PCB with screw holes on module which is having same module dimension as WG24064A, you could choose our WF52QTLBSDBN0. More details, please refer to next introduction. This TFT LCD WF52A module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. Below is the basic specification of WF52ATLASDNN0 as reference.

Item-WF52ATLASDNN0 Dimension
Size 5.2 inch
Dot Matrix 480 x RGBx128
Module dimension 140.4 x 49.87 x 3.0 mm
Active area 127.152 x 33.9072 mm
Dot pitch 0.0883 x 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction  6 o'clock
Gray Scale Inversion Direction 12 o'clock
Backlight Type LED, Normally White
Driver IC ST7252 Or Equal
Interface RGB 24bit
Touch Panel CTP option ( Under development )
High Brightness Option
Surface Glare
Product Introduction - 5.2" TFT WF52A (TFT Panel only)
Product Introduction - 5.2" TFT WF52A (TFT Panel only)

 

Link to Winstar WF52ATLASDNN0 web page

TOP

 

Product Introduction - 5.2" TFT WF52Q (with Controller Board)

WF52QTLBSDBN0 model is an upgrade solution for monochrome Graphic STN WG24064A COB module to colorful TFT display, both diagonal size are 5.2 inch. This STN WG24064A is having the resolution 240x64 pixels; the TFT WF52QTLBSDBN0 is having resolution 480x128 pixels which are with higher resolution and colorful images. Winstar developed this wholly new design WF52A with SSD1963 controller board on module to be a replacement of STN WG24064A.

 

Winstar TFT WF52QTLBSDBN0 is having module dimension of 180.0 x 65.0 mm which is the same as Winstar monochrome Graphic WG24064A. Therefore, the customers can upgrade the existing mono STN WG24064A to color TFT directly since we designed a Pin-to-Pin interface on WF52QTLBSDBN0 module. 

WF52QTLBSDBN0 is built in with SSD1963 controller board on module. It supports 8080 family MPU 8bit and 16 bit parallel interface. There are two connection interface options; 26 pins 8 bits using pin header and 36 pins 8 bits/16 bits using ZIF connector. The LCM PIN Definition of CON1 is for those who used WG24064A version, it is pin-to-pin from pin 1 to pin 20. WG24064A is using A.K pin for backlight, WF52QTLBSDBN0 is using pin 21 and pin 22 for backlight. More details, please contact with our sales persons for datasheet.

This TFT LCD WF52QTLBSDBN0 module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. Below is the basic specification of WF52QTLBSDBN0 as reference.

Item-WF52QTLBSDBN0 Dimension
Size 5.2 inch
Dot Matrix 480 x RGBx128
Module dimension 180.0 x 65.0 x 8.8 mm
Active area 127.152 x 33.9072 mm
Dot pitch 0.0883 x 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction  6 o'clock
Gray Scale Inversion Direction 12 o'clock
Backlight Type LED, Normally White
Driver IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Panel CTP option (Under development )
High Brightness Option
Surface Glare
5.2" TFT WF52A with Controller Board

► WF52QTLBSDBN0 Contour Drawing

WF52QTLBSDBN0 supports 8080 family MPU 8bit and 16 bit parallel interface. There are two connection interface options. If customers would like to upgrade from WG24064A, please choose CON 1 interface; 26 pins 8 bits using pin header. If customers would like to use WF52A on a new project, please choose CON 4, it supports 8080 parallel interface, 36 pins 8 bits/16 bits using ZIF connector. For more details, please contact with our sales persons for full datasheet.

5.2" TFT WF52A with Controller Board

Link to Winstar WF52QTLBSDBN0 web page

 

 

TOP

 

Product Introduction - 3.9" TFT WF39A

WF39A is 480x128 dots 3.9 inch color TFT LCD display module which is having the module dimension of 105.5x40.64 mm and Active area size of 95.04x25.34 mm. WF39A TFT LCD display is without built in controller on module. WF39A supports RGB interface, 3.3V (typical) power supply, supports DE mode and Sync mode. It’s View Angle (U/D/R/L) is:50/70/70/70 (typical); brightness is 500 cd/m2. This WF39A TFT module can be used in information display device, server system, audio system, industrial device, security equipment which requires display in high quality and colorful image.

 

WF39A TFT LCD module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. Below is the basic specification of WF39A as reference.

Item-WF39A Dimension
Size 3.9 inch
Dot Matrix 480 x RGBx128(TFT)
Module dimension 105.5 x 40.64 x 2.95 mm
Active area 95.04 x 25.34 mm
Dot pitch 0.066 x 0.198 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Touch Panel TBD
Surface Anti-Glare
3.9" TFT WF39A
3.9" TFT WF39A

 

 

TOP

 

Product Introduction - 4.6" TFT WF46A

Winstar WF46A is 4.6 inch color TFT LCD display module made of 800x320 dots pixel. WF46A model is having the module dimension of 120.7x56.16 mm and Active area size of 108x43.2 mm. This WF46A TFT LCD display is without built in controller on module. It supports RGB interface, 3.3V (typical) power supply, supports DE mode and Sync mode. It’s View Angle (U/D/R/L) is 50/70/70/70 (typical); brightness is 350 cd/m2. This WF46A TFT module can be used in information display device, server system, audio system, industrial device, security equipment which requires display in high quality and colorful image.

WF46A TFT LCD module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. Below is the basic specification of WF46A as reference.

Item-WF46A Dimension
Size 4.6 inch
Dot Matrix 800 x RGBx320(TFT)
Module dimension 120.7 x 56.16 x 3.1 mm
Active area 108 x 43.2 mm
Dot pitch 0.045 x 0.135 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Touch Panel  TBD
Surface Anti-Glare
4.6" TFT WF46A
4.6" TFT WF46A

Link to Winstar WF46A web page

 

 

TOP

 

Product Introduction - 1.5" OLED WEO128128A

Winstar WEO128128A is a passive matrix OLED display which is made of 128x128 pixels, diagonal size 1.5 inch. The WEO128128A has the outline dimension of 33.8 x 36.5 mm and AA size 26.86 x 26.83 mm; it is built in with SSD1327ZB controller IC and it communicates via 6800/8080 8-bit parallel, I2C and 4-wire SPI serial interface, 3V power supply. The WEO128128A is a COG structure OLED display which is ultra thin and no need of backlight (self emitting); it’s lightweight and low power consumption. This OLED module is suitable for handheld instruments, meters, IoT, etc. The standard emitting color for this item is yellow, but options are available in white and sky blue.

WEO128128A module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +80℃. Below is the basic specification of WEO128128A as reference. For any further information such as samples or quotation, please contact with our sales rep.

 

Item-WEO128128A Dimension
Dot Martix 128 x 128 Dots
Module dimension 33.8× 36.5 × 2.05 mm
Active Area 26.86×26.83 mm
Pixel Size 0.185 × 0.185 mm
Pixel Pitch 0.21 × 0.21 mm
Display Mode Passive Matrix
Display Color White/Yellow/Sky Blue
Drive Duty 1/128Duty
IC SSD1327ZB
Interface 6800/8080/SPI/I2C
1.5" OLED WEO128128A
1.5" OLED WEO128128A

Link to Winstar WEO128128A web page

 

 

TOP

 

 

Friendly Printing