LVDS LCD TFT Standard 7 pollici
Modello numero WF70A7TIAHLNN0
►Dimensione: 7 pollici
►Risoluzione : 1024 x 600 punti
►Direzione di visione : 12H
►Interfaccia : LVDS
►Driver IC:EK79001HE + EK73215BCGA
►Scheda di controllo : No
►Luminosità (cd/m²): 600
►Cornice di fissaggio: No
►Touch Screen : senza schermo touch
DISEGNO
SPECIFICHE TECNICHE
Funzione dei Pin di Interfaccia
Pin No. | Simbolo | I/O | Funzione |
---|---|---|---|
1 | VCOM | P | Common Voltage |
2 | VDD | P | Digital circuit |
3 | VDD | P | Digital circuit |
4 | NC | --- | No connection |
5 | Reset | I | Global reset pin |
6 | STBYB | I | Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z |
7 | GND | P | Ground |
8 | RXIN0- | I | Negative LVDS differential data input |
9 | RXIN0+ | I | Positive LVDS differential data input |
10 | GND | P | Ground |
11 | RXIN1- | I | Negative LVDS differential data input |
12 | RXIN1+ | I | Positive LVDS differential data input |
13 | GND | P | Ground |
14 | RXIN2- | I | Negative LVDS differential data input |
15 | RXIN2+ | I | Positive LVDS differential data input |
16 | GND | P | Ground |
17 | RXCLKIN- | I | Negative LVDS differential clock input |
18 | RXCLKIN+ | I | Positive LVDS differential clock input |
19 | GND | P | Ground |
20 | RXIN3- | I | Negative LVDS differential data input |
21 | RXIN3+ | I | Positive LVDS differential data input |
22 | GND | P | Ground |
23 | NC | --- | No connection |
24 | NC | --- | No connection |
25 | GND | P | Ground |
26 | NC | --- | No connection |
27 | DIMO | O | Backlight CABC controller signal output |
28 | SELB | I | 6bit/8bit mode select H:6bit / L:8bit |
29 | AVDD | P | Power for Analog Circuit |
30 | GND | P | Ground |
31 | LED- | P | LED Cathode |
32 | LED- | P | LED Cathode |
33 | L/R | I | Horizontal inversion |
34 | U/D | I | Vertical inversion |
35 | VGL | P | Negative power for TFT |
36 | GND | P | Ground |
37 | GND | P | Ground |
38 | VGH | P | Positive power for TFT |
39 | LED+ | P | LED Anode |
40 | LED+ | P | LED Anode |
Specifiche generali
Articolo | Dimensioni | Unità |
---|---|---|
Dimensione | 7.0 | pollici |
A matrice di punti | 1024 × RGB × 600(TFT) | dots |
Dimensione del modulo | 164.8(W) × 99.8(H) × 5.65(D) | mm |
Area attiva | 154.2144 × 85.92 | mm |
Passo del Dot | 0.1506 × 0.1432 | mm |
Tipo LCD | TFT, Bianco, Trasmissivo | |
Direzione di visione | 12 o'clock | |
Direzione di inversione della scala dei grigi | 6 o'clock | |
Proporzioni dell’area visiva (ratio) | 16:9 | |
Driver IC | EK79001HE + EK73215BCGA | |
Tipo di backlight | LED, Bianco | |
Con / senza Touch Panel | senza pannello touch | |
Interfaccia | LVDS | |
Superficie | Anti-Glare |
Valori massimi assoluti
Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Temperatura di stock | TST | -30 | - | +80 | ℃ |
Caratteristiche elettriche
Articolo | Simbolo | Valore standard | Unità | ||
---|---|---|---|---|---|
Valore Min | Valore tipico | Valore massimo | |||
Power voltage | DVDD | 3.0 | 3.3 | 3.6 | V |
AVDD | 9.4 | 9.6 | 9.8 | V | |
VGH | 17 | 18 | 19 | V | |
VGL | -6.6 | -6.0 | -5.4 | V | |
Input signal voltage | VCOM | 3.1 | 3.3 | 3.6 | V |
Input logic high voltage | VIH | 0.7 DVDD | - | DVDD | V |
Input logic low voltage | VIL | 0 | - | 0.3 DVDD | V |