Issue No. 118
- Contents
- 1. 2.83 inch Transflective TFT-LCD WF0283ATDAJDNN0
- 2. 2.4 inch IPS Portrait Mode TFT WF24LTYAJDNN0
- 3. 2.42 inch COG Graphic OLED WEF012864H
- 4. 0.91 inch OLED WEO012832D Thinner Version
- 5. 0.91 inch OLED WEO012832F Thinner Version
2.83 inch Transflective TFT-LCD WF0283ATDAJDNN0
WF0283ATDAJDNN0 is a 2.83 inch portrait mode Transflective TFT-LCD display module, made of resolution 240x320 pixels. WF0283A module built in with HX8367-A driver IC, it supports MCU/SPI/RGB interface; View Direction 3 o'clock, Gray Scale Inversion Direction 9 o'clock, Aspect Ratio 3:4, brightness 500 nits (typical value), Glare surface panel. This TFT module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.
WF0283A is a Transflective TFT-LCD display; it is characterized by very good readability in bright environments and direct sunlight. Transflective TFT display featured a transparent reflector in front of the backlight. The incoming light is reflected and used to illuminate the TFT display. Therefore, the readability of the content in very bright light is perfect even without any backlight. Customers using a transflective TFT module can save power by reducing or turning off the display’s backlight during bright environments.
|
2.4 inch IPS Portrait Mode TFT WF24LTYAJDNN0
WF24LTYAJDNN0 is a 2.4 inch IPS TFT-LCD display module; made of resolution 240 x 320 pixels. WF24L module built in with ILI9341V controller IC, it supports MCU8080 and SPI interface, it featured with IPS panel which is having the advantages of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical), contrast ratio 800 (typical value), brightness 500 nits (typical value), Glare surface panel. WF24L is having Resistive Touch Panel (RTP) available for option.
This 2.4 inch TFT- LCD display is portrait mode; it integrated controller IC ILI9341V on module, Supply Voltage for Analog (VCI) from 2.5V to 3.3V. This TFT module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30 to +80 ℃.
|
2.42 inch COG Graphic OLED WEF012864H
Winstar OLED WEF012864H is made of 128x64 pixels, diagonal size 2.42 inch. This graphic display is built-in SSD1309ZC controller IC and it communicates via 6800/8080 8-bit parallel, I2C and 4-wire serial interface. WEF012864H is having the same OLED panel as existing WEO012864G and featured with a bezel (frame) on module. WEF012864H is using a low resistance OLED Panel, and the FPC pin assignment has been defined as the same as WEF012864Q (30 pins).
WEF012864H is a COG structure OLED display; this OLED module is lightweight, low power and very thin, it is suitable for wall / meter devices, home applications, intelligent technology devices, energy systems, communication systems, medical instrument, etc. WEF012864H OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.
WEF012864HWPP3N00F00: White
|
0.91 inch OLED WEO012832D Thinner Version
The 0.91 inch is one of the most popular sizes of COG OLED for wearable displays. Winstar released a thinner version of WEO012832D model which is made of 128x32 pixels. The outline dimension, active area, viewing area and electronic characteristics of the thinner version and the original WEO012832D are the same, the main difference is the module thickness, the new one is 1.26 mm on thickness as to the original one is 1.45 mm.
The new version thin 0.91" WEO012832D is also built-in SSD1306BZ driver IC; it communicates via 4-wire serial SPI interface only. WEO012832D OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃. Adopting thinner OLED panel is a market trend; please adopt the thinner one for new design projects. If customers would like to use the new thinner one to replace the existing one, please contact Winstar sales reps for more details.
WEO012832DWPP3N00008 : White
WEO012832DLPP3N00004 : Yellow
|
0.91 inch OLED WEO012832F Thinner Version
WEO012832F is a popular small OLED display which is made of 128x32 pixels, diagonal size 0.91 inch. We released a thinner version of WEO012832F which having the same outline dimension, active area, viewing area and electronic characteristics as the original one; the main difference between the thinner version and the original WEO012832F is the module thickness, the thinner one is 1.26 mm as to the original one is 1.45 mm. WEO012832F module is built in with SSD1306BZ controller IC; it supports I2C interface and having 14 pins FPC pinout.
WEO012832F is a COG structure OLED display, its controller is built-in voltage generation only need a single 3V power supply. This OLED I2C Display is lightweight, low power and small, this COG module is suitable for wall / meter devices, home applications, Cloud/IoT system, handheld instruments, intelligent technology devices, energy systems, automotive, communication systems, medical instrument, wearable device, etc. WEO012832F OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.
WEO012832FWPP3N00001: White
WEO012832FLPP3N00001: Yellow
|