Accueil Produits Afficheur TFT Module LCD TFT standard WF57FTLAFDNT0

N° de modèle WF57FTLAFDNT0

►Dimension 5.7 pouces
►Résolution d’écran: 640 x 480 points
►Vue préférentielle 6h
►Interface : RGB
►CI pilote:HX8250-A+HX8678
►Carte de contrôle: Option
►Luminosité (Cd/m²): 350
►cadre de maintien avec points de fixation: --
►Dalle tactile: Avec dalle tactile résistive

DESSIN

5.7 Resistive Touch Screen RGB TFT, RGB LCD Display, LCD RGB - WF57FTLAFDNT0

SPÉCIFICATIONS

Interface

Pin Symbole Function
1 DGND Ground for digital circuit
2~3 VCC Power Supply : +3.3V
4 DGND Ground for digital circuit
5 VGL Gate off power
6 DGND Ground for digital circuit
7 VGH Gate on power
8 DGND Ground for digital circuit
9 UD Up/down selection
10 LR Left /right selection
11 SPENA Chip select
12 SPCK Serial Clock
13 SPDA Serial Data
14 NC No connect
15 DGND Ground for digital circuit
16~21 B5~B0 Blue Data bus
22 NC(TOP) No connection
23 NC(RIGHT) No connection
24 DGND Ground for digital circuit
25~30 G5~G0 Green Data bit
31 NC(BOTTOM) No connection
32 NC(LEFT) No connection
33 AGND Ground
34 AVDD Analog power: 10V
35 AVDD Analog power: 10V
36 AGND Ground
37~42 R5~R0 Red Data bit
43~44 DGND Ground for digital circuit
45 DE Data Enable input
46 CLK Data Clock
47 HS Horizontal sync input
48 VS Vertical sync input
49 VCOM VCOM driving input
50 DGND Ground for digital circuit

Spécifications générales

Article Dimensions Unité
Dimension 5.7 pouce
Matrice de points 640 × RGB × 480(TFT) points
Dimensions du module 127.14 × 100.94 ×7.45 mm
Zone active 115.2 × 86.4 mm
Pas des points 0.06 × 0.18 mm
Type de LCD TFT, Blanc, Transmissif
Zone d'affichage 6 o’clock
Inversion de sens de l'échelle de gris 12 o’clock
Rapport d'aspect 4:3
Type de rétroéclairage LED , Blanc
Avec/sans dalle tactile Avec dalle tactile résistive
Surface Anti- Reflets

Valeurs nominales maximales absolues

Article Symbole Min Typ Max Unité
Température de fonctionnement TOP -20 +70
Température de stockage TST -30 +80

Caractéristiques électroniques

Article Symbole État Min Typ Max Unité
Supply Voltage For LCM VCC 3.0 3.3 3.6 V
Supply Current For LCM ICC - 9 mA
Power Consumption - - 29.7 mW
Power Supply for Analog AVDD AVDD-AGND 10.5   11 V
Input Voltage VIH H Level 0.7VCC VCC V
VIL L Level 0 0.3VCC V
Recommended LC
Driving Voltage for
25℃
VGH (Note) 13 16 17 V
VGL -8 -7 -6 V
VCOM 3.97 4.02 4.07 V

Produits liés

go top
close