4.3" SSD1963 TFT LCD Panel with Controller Board
Model No. WF43QTIBEDBND
►4.3" TFT LCD Panel
►Resolution : 480 x 272 dots
►View Direction : 12H
►Interface : MCU
►Controller IC:SSD1963
►Control-Board : Yes
►Brightness(cd/m²): 500
►Frame Through Hole: Yes
►Touch Screen : No
Description
The WF43QTIBEDBND is a 4.3 inch TFT LCD Display which is Winstar WF43H extended model with SSD1963 controller board plus a 36 pin-out connector on board. The model is available in 8080 family MPU 8 bit or 16 bit interface option and pre-defined pin no. 33 ~ 36 as backlight supply; so there is no need to design extra backlight circuit. This 4.3" TFT LCD panel is feature with Glare coating surface panel having benefited of less-reflective.
Winstar Q series is support with Solomon SSD1963 Which has the traditional inputs and drive TFT by VESA signal. Therefore, there is no need of T-COM circuit on board. Besides, we have integrated all functions including TFT connection, backlight driver, and touch panel into only one connection.
DRAWING
SPECIFICATIONS
Interface
Pin | Symbol | Function |
---|---|---|
1 | GND | System round pin of the IC. Connect to system ground. |
2 | VDD | Power Supply : +3.3V |
3 | BL_E | Backlight control signal , H: On \ L: Off |
4 | D/C | Data/Command select |
5 | WR | Write strobe signal |
6 | RD | Read strobe signal |
7 | DB0 | Data bus |
8 | DB1 | Data bus |
9 | DB2 | Data bus |
10 | DB3 | Data bus |
11 | DB4 | Data bus |
12 | DB5 | Data bus |
13 | DB6 | Data bus |
14 | DB7 | Data bus |
15 | DB8 | Data bus (When select 8bits mode, this pin is NC) |
16 | DB9 | Data bus (When select 8bits mode, this pin is NC) |
17 | DB10 | Data bus (When select 8bits mode, this pin is NC) |
18 | DB11 | Data bus (When select 8bits mode, this pin is NC) |
19 | DB12 | Data bus (When select 8bits mode, this pin is NC) |
20 | DB13 | Data bus (When select 8bits mode, this pin is NC) |
21 | DB14 | Data bus (When select 8bits mode, this pin is NC) |
22 | DB15 | Data bus (When select 8bits mode, this pin is NC) |
23 | NC | No connection |
24 | NC | No connection |
25 | CS | Chip select |
26 | RESET | Hardware reset |
27 | DIP ON | Display control H: On \ L:Off |
28 | NC | No connection |
29 | NC | No connection |
30 | NC | No connection |
31 | NC | No connection |
32 | NC | No connection |
33 | VLED- | VLED- for B/L LED inverter (GND) |
34 | VLED- | VLED- for B/L LED inverter (GND) |
35 | VLED+ | VLED+ for B/L LED inverter (+3.3V) |
36 | VLED+ | VLED+ for B/L LED inverter (+3.3V) |
General Specifications
Item | Dimension | Unit |
---|---|---|
Size | 4.3 | inch |
Dot Matrix | 480 x RGB x 272(TFT) | dots |
Module dimension | 106.7 x 69.6 x 6.95 | mm |
Active area | 95.04 x 53.856 | mm |
Dot pitch | 0.066 x 0.198 | mm |
LCD type | TFT, Normally White, Transmissive | |
View Direction | 12 o'clock | |
Gray Scale Inversion Direction | 6 o'clock | |
Aspect Ratio | 16:9 | |
Backlight Type | LED, Normally White | |
Controller IC | SSD1963 | |
Interface | Digital 8080 family MPU 8bit/16bit | |
Touch Panel | Without Touch Panel | |
Surface | Glare |
Absolute Maximum Ratings
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Electrical Characteristics
Operating conditions: (CON3.Pin1=GND, Pin2=VDD)Item | Symbol | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage For LCM | VDD | - | 3.0 | 3.1 | 3.3 | V |
Supply Current For LCM | IDD | - | - | 200 | 300 | mA |
Search keyword: tft 4.3, tft 4.3", 4.3 tft lcd, 4.3" tft lcd, 4.3 inch tft lcd, tft lcd 4.3, 4.3 tft display, 4.3" tft display, 4.3 inch tft display, tft display 4.3, tft display 4.3"